Share Latest May-2024 156-586 DUMP with 77 Questions and Answers
PDF Dumps 2024 Exam Questions with Practice Test
NEW QUESTION # 35
What function receives the AD log event information?
- A. ADLOG
- B. PEP
- C. FWD
- D. CPD
Answer: B
NEW QUESTION # 36
After kernel debug with "fw ctl debug" you received a huge amount of information. It was saved in a very large file that is difficult to open and analyze with standard text editors. Suggest a solution to solve this issue.
- A. Reduce debug buffer to 1024KB and run debug for several times
- B. Divide debug information into smaller files. Use "fw ctl kdebug -f -o "filename" -m 25 - s "1024"
- C. Use "fw ctl zdebug" because of 1024KB buffer size
- D. Use Check Point InfoView utility to analyze debug output
Answer: B
NEW QUESTION # 37
You are seeing output from the previous kernel debug. What command should you use to avoid that?
- A. fw ctl debug 0
- B. fw ctl debug = 0
- C. fw ctl clean buffer = 0
- D. fw ctl zdebug disable
Answer: B
NEW QUESTION # 38
If SmartLog is not active or failed to parse results from server, what commands can be run to re-enable the service?
- A. smartlogstart and smartlogstop
- B. smartlogrestart and smartlogstart
- C. smartlogstart and smartlogsetup
- D. smartloginit and smartlogstop
Answer: A
NEW QUESTION # 39
Which Daemon should be debugged for HTTPS Inspection related issues?
- A. VPND
- B. HTTPD
- C. FWD
- D. WSTLSD
Answer: D
NEW QUESTION # 40
When dealing with monolithic operating systems such as Gaia, where are system calls initiated from to achieve a required system level function?
- A. User Mode
- B. Kernel Mode
- C. Medium Path
- D. Slow Path
Answer: A
NEW QUESTION # 41
When a User process or program suddenly crashes, a core dump is often used to examine the problem. Which command is used to enable the core-dumping via GAIA clish?
- A. set core-dump total
- B. set core-dump per process
- C. set core-dump enable
- D. set user-dump enable
Answer: C
NEW QUESTION # 42
In some scenarios it is very helpful to use advanced Linux commands for troubleshooting purposes. Which command displays information about resource utilization for running processes and shows additional information for core utilization and memory?
- A. cptop
- B. top
- C. vmstat
- D. mpstat
Answer: B
NEW QUESTION # 43
SmartEvent utilizes the Log Server, Correlation Unit and SmartEvent Server to aggregate logs and identify security events. The three main processes that govern these SmartEvent components are:
- A. eventiasv, eventiarp,eventiacu
- B. cpcu, cplog, cpse
- C. cpsemd, cpsead, and DBSync
- D. fwd, secu, sesrv
Answer: C
NEW QUESTION # 44
If the cpsemd process of SmartEvent has crashed or is having trouble coming up, then it usually indicates that
__________.
- A. Postgres database is down
- B. The loqqed in administrator does not have permissions to run SmartEvent
- C. Cpd daemonis unable to connect to the logserver
- D. The SmartEvent core on the Solr indexer has been deleted
Answer: A
NEW QUESTION # 45
What information does the doctor-log script supply?
- A. Logging errors. Exceptions, Repair options
- B. Repair options. Logging Rates, Logging Directories
- C. Current and daily average logging rates. Indexing status, Size
- D. Logging rates. Logging Directories, List of troubleshooting tips
Answer: C
NEW QUESTION # 46
VPN's allow traffic to pass through the Internet securely by encrypting the traffic as it enters the VPN tunnel and then decrypting the traffic as it exists. Which process is responsible for Mobile VPN connections?
- A. fwk
- B. vpnd
- C. cvpnd
- D. vpnk
Answer: C
NEW QUESTION # 47
What are the four main database domains?
- A. System, User, Global. Log
- B. Local, Global, User, VPN
- C. System. Global. Log. Event
- D. System, User, Host, Network
Answer: A
NEW QUESTION # 48
What is the correct syntax to turn a VPN debug on and create new empty debug files?
- A. vpn debuq trunkon
- B. vpndebugtrunc on
- C. vpn kdebugon
- D. vpn debugtruncon
Answer: D
NEW QUESTION # 49
The two procedures available for debugging in the firewall kernel are
i. fw ctl zdebug
ii. fw ctl debug/kdebug
Choose the correct statement explaining the differences in the two
- A. (i) is used to debug the access control policy only, however (ii) can be used to debug a unified policy
- B. (i) is used on a Security Gateway, whereas (ii) is used on a Security Management Server
- C. (i) is used for general debugging, has a small buffer and is a quick way to set kernel debug flags to getan output via command line whereas (ii) is useful when there is a need for detailed debugging and requires additional steps to set the buffer and get an output via command line
- D. (i) is used to debug only issues related to dropping of traffic, however (ii) can be used for any firewall issue including NATing, clustering etc.
Answer: C
NEW QUESTION # 50
Which of the following inputs is suitable for debugging HTTPS inspection issues?
- A. vpn debug cptls on
- B. fw ctl debug -m fw + conn drop cptls
- C. fw diag debug tls enable
- D. fw debug tls on TDERROR_ALL_ALL=5
Answer: B
NEW QUESTION # 51
Which of the following would NOT be a flag when debugging a unified policy?
- A. clob
- B. rulebase
- C. connection
- D. tls
Answer: D
NEW QUESTION # 52
Which of the following is a component of the Context Management Infrastructure used to collect signatures in user space from multiple sources, such as Application Control and IPS, and compiles them together into unified Pattern Matchers?
- A. CMI Loader
- B. PSL - Passive Signature Loader
- C. Context Loader
- D. cpas
Answer: C
NEW QUESTION # 53
What process monitors, terminates, and restarts critical Check Point processes as necessary?
- A. CPM
- B. CPVVD
- C. FWD
- D. FWM
Answer: B
NEW QUESTION # 54
Your users have some issues connecting with Mobile Access VPN to your gateway. How can you debug the tunnel establishment?
- A. in the file $CVPNDIR/conf/httpd.conf change the line Loglevel .. To LogLevel debug and run cvpnrestart
- B. run vpn debug truncon
- C. run fw ctl zdebug -m sslvpn all
- D. in the file $VPNDIR/conf/httpd.conf change the line Loglevel .. To LogLevel debug and run vpn restart
Answer: C
NEW QUESTION # 55
You are using the Identity Collector with Identity Awareness in large environment. Users report that they cannot access resources on Internet. You identify that the traffic is matching the cleanup rule instead of the proper rule with Access Roles using the IDC. How can you check if IDC is working?
- A. pdp debug set IDP all all
- B. ad query | debug on
- C. pep debug idc on
- D. pdp connections idc
Answer: D
NEW QUESTION # 56
......
Dumps for Free 156-586 Practice Exam Questions: https://www.topexamcollection.com/156-586-vce-collection.html
156-586 Dumps PDF And Certification Training: https://drive.google.com/open?id=1EXammz9vV_ox6kuqJb5cVqnib31h6bjG
