Real JN0-1361 are Uploaded by TopExamCollection provide 2021 Latest JN0-1361 Practice Tests Dumps.
All JN0-1361 Dumps and Service Provider Design, Specialist (JNCDS-SP) Training Courses Help candidates to study and pass the Service Provider Design, Specialist (JNCDS-SP) Exams hassle-free!
Juniper JN0-1361 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
NEW QUESTION 11
Exhibit:
Referring to the exhibit which statement is true about the connectivity between service provider A and B regarding the customer's network information?
- A. The service providers must set up MP-BGP between each other to support this inter-network routing.
- B. The customer is acting as a colocation (meet-me) for an inter-network routing scenario shown in the exhibit.
- C. The service providers may not be aware that they are providing inter-network routing for the customer.
- D. The service providers must set up MPLS label exchange between each other for this scenario to work.
Answer: A
NEW QUESTION 12
What are two ways that allow BGP route reflectors to advertise more optimal IGP next hops? (Choose two)
- A. Implement route reflectors at each POP.
- B. Implement a centralized route reflector.
- C. Use SPRING.
- D. UseBGP-ORR.
Answer: B,D
NEW QUESTION 13
You work for an organization providing hosting services for customer application VMs Traditional, your organization maintained isolation between customer workloads by assigning unique VLAN IDs to each customer network. Your organization is approaching the upper limit of 4094 VLANs available to uniquely identify customer networks You need to alleviate this limitation and provide more than 4094 unique network identifiers.
Which technology would satisfy these requirements?
- A. EVPN
- B. MPLS
- C. VXLAN
- D. MP-BGP
Answer: C
NEW QUESTION 14
You want to implement Source Packet Routing in Networking (SPRING) in your network core using MPLS as the data plane for traffic engineering purposes.
In this scenario what are two protocols that would be used to distribute the segment IDs? (Choose two )
- A. LDP
- B. OSPF
- C. RSVP
- D. IS-IS
Answer: B,D
NEW QUESTION 15
You have a customer that operates multiple branch offices and they want a low cost access solution. The WAN must be secure What would satisfy their requirement?
- A. an encrypted MPLS service
- B. an IPsec VPN using broadband connections
- C. a private WAN
- D. a managed MPLS service
Answer: B
NEW QUESTION 16
Exhibit:
You work for service provider B that wants to implement a hot potato routing policy on the network so that router C uses link C-A to reach service provider A's advertised routes and router D uses link D-B to reach Service Provider A's advertised routes Currently traffic from router C is traversing the core to exit the network on router B .
Referring to the exhibit, what are two design actions that would satisfy the requirements? (Choose two.)
- A. Implement BGP-ORR
- B. Configure the route reflector to send multiple copies of a route learned from different IBGP peers to its clients.
- C. Configure new IBGP neighbors between routers C and A and routers D and B
- D. Implement BGP-LS
Answer: B,C
NEW QUESTION 17
You work for a service provider and are designing an L3VPN with Internet access solution for a customer using Provider Independent (PI) IPv6 space.
Which networking designs will work for this customer?
- A. Use NAT64 to convert PI space to IPv4 internet addresses, set up 6VPE routing instances on your PE routers for the customer.
- B. Use NAT64 to convert PI space to your public IPv6 space set up 6VPE routing instances on your PE routers for the customer
- C. Use NAT66 to convert PI space to your public IPv6 space set up 6PE on your PE routers to transport IPv6 traffic natively.
- D. Use NAT64 to convert PI space to IPv4 Internet addresses set up 6PE on your PE routers to transport IPv4 traffic natively.
Answer: A
NEW QUESTION 18
You are asked to design a Cloud CPE solution that can dynamically add new sites to an existing MPLS Layer 3 VPN. The CPE for each new site must support the service chaining of multiple VNFs.
Which Juniper Networks Cloud CPE solution supports these requirements?
- A. Distributed Cloud CPE - Managed Internet
- B. SD-WAN
- C. Centralized Cloud CPE
- D. Distributed Cloud CPE - Option 1
Answer: D
NEW QUESTION 19
Exhibit:
Referring to the exhibit which type of IPsec VPN should be used to create the desired topology?
- A. hub-and-spoke VPN
- B. fully meshed VPN
- C. AutoVPN
- D. Group VPN
Answer: D
NEW QUESTION 20
Exhibit:
You are asked to design a solution that will provision a circuit from the corporate headquarters to a remote branch. The circuit must be secure, and must support IGP adjacencies. IPsec has been chosen to secure traffic across the WAN connection.
Referring to the exhibit which statement describes another requirement for this circuit to function correctly?
- A. You must use a service provider Layer 3 VPN to establish routing protocols across the circuit
- B. You must implement GRE over IPsec to establish routing protocols across the circuit.
- C. You must use a service provider Layer 2 VPN to establish routing protocols across the circuit.
- D. You must increase the MTU of the IPsec tunnel to more than 1500 bytes to allow routing updates across the circuit.
Answer: B
NEW QUESTION 21
Which two statements about a customer's WAN connectivity are correct? (Choose two)
- A. SD-WAN dynamically manages customer traffic across multiple WAN connections.
- B. SD-WAN requires an IPsec tunnel to connect customer sites across the Internet.
- C. Layer 3 managed services automatically include Layer 2 provisioning to support the customer's needs.
- D. Layer 2 managed services connects the customer's sites and the customer provides their own routing capability.
Answer: A,D
NEW QUESTION 22
Your customer wants to use NorthStar to communicate with network devices and acquire the MPLS topology. Which protocol is recommended for this purpose?
- A. PIM-SSM
- B. ISIS
- C. BGP-LS
- D. OSPF
Answer: C
NEW QUESTION 23
Your customer connects to their service providers using fiber-based Ethernet connections in a shared collocation room. The customer has expressed concerns about wire tapping and man-in-the-middle attacks, and has asked for your design recommendation to minimize such attacks.
Which service addresses the customer's concern?
- A. 802 1x
- B. BGPFIowSpec
- C. MACsec
- D. 802 3ad
Answer: C
NEW QUESTION 24
Your company is considering how to add more visibility in their WAN MPLS links.
Which Juniper Networks product provides this type of traffic management?
- A. AppFormix
- B. NorthStar
- C. JSA Series
- D. Contrail
Answer: B
NEW QUESTION 25
Exhibit:
Referring to the exhibit, which two methods would be used by the designer of ISP E to ensure that traffic between ISP C and ISP A will traverse through ISP B? (Choose two.)
- A. Apply the BGP import policy (to EBGP peers) on R4 and R5 to modify the AS PATH attribute so that the path through ISP D is less preferred.
- B. Apply the BGP import policy (to EBGP peers) on R4 to adjust the ORIGIN for the routes received from ISP B to unknown.
- C. Apply the BGP export policy (to IBGP peers) on R4 and R5 to adjust the MED on the ISP C routes so that the path through ISP D is less preferred.
- D. Apply the BGP import policy (to EBGP peers) on R4 anaVor R5 to adjust the local preference on the ISP C routes so that the path through ISP B is more preferred
Answer: A,C
NEW QUESTION 26
You are asked to provide a proposal for a service provider's OSPF network. The customer is concerned about the volume of link-state advertisements within their network and want to limit this traffic.
Given this scenario which design component would satisfy the customer's requirement?
- A. Use multiple areas.
- B. Use the same AS number.
- C. Use multiple levels.
- D. Use the same router IDs.
Answer: A
NEW QUESTION 27
What are three components of a class-of-service scheduler? (Choose three.)
- A. policing rate
- B. queue priority
- C. forwarding class
- D. delay buffer size
- E. transmit rate
Answer: B,D,E
Explanation:
Junos OS schedulers allow you to define the priority, bandwidth, delay buffer size, rate control status, and RED drop profiles to be applied to a particular queue for packet transmission
NEW QUESTION 28
Which management platform automates and simplifies the management of Juniper Networks switching, routing, and security products?
- A. Juniper Secure Analytics
- B. Junosphere
- C. Junos Space
- D. Junoscope
Answer: C
NEW QUESTION 29
You are asked to improve the convergence time in your large enterprise WAN Each branch office network is multihomed to two central aggregation points using BGP.
Which action would satisfy the requirement?
- A. Decrease interface hold timers.
- B. Use Bidirectional Forwarding Detection.
- C. Provision more WAN bandwidth.
- D. Increase interface hold timers.
Answer: B
NEW QUESTION 30
You are designing a multi-site data center environment with data center interconnects between sites.
Which two statements are true in this scenario? (Choose two. )
- A. All data centers must be in the same Layer 2 broadcast domain and subnet.
- B. EVPN with VXLAN can be used to interconnect the multiple sites.
- C. VPLS can be used to interconnect the multiple sites.
- D. The data centers must be connected with a full mesh design.
Answer: B,C
NEW QUESTION 31
......
Valid Way To Pass Juniper's JN0-1361 Exam with : https://www.topexamcollection.com/JN0-1361-vce-collection.html
