Real Huawei H12-811-ENU Exam Dumps with Correct 454 Questions and Answers
Valid H12-811-ENU Test Answers & Huawei H12-811-ENU Exam PDF
Huawei H12-811-ENU (HCIA-Datacom V1.0) certification exam is recognized globally and is highly respected in the industry. HCIA-Datacom V1.0 certification demonstrates the candidate's expertise in data communication and their ability to design, deploy, and manage network solutions. It is an excellent way for individuals to showcase their skills and knowledge in the field of data communication and to advance their careers in this area.
NEW QUESTION # 77
Which of the following fields does the MPLS header include? (Multiple choice)
- A. Tos
- B. Label
- C. EXP
- D. TTL
Answer: B,C,D
NEW QUESTION # 78
The output information of a certain device is shown in the figure. Which of the following statements is correct? (Multiple Choice)
<Huawe1>display interface G1gabitEthernet 0/0/0
G1gabi tEthernet0/0/0 current state : UP
Line protocol current state : UP
Route Port, The Maximum Transmit Unit is 1000
Internet Address is 10.0.12.2/2 4
IP Sending Frames' Format is PRTFMT ETENT_2.Hardware address is 00e0- fc22- 4fff
Port Mode: FORCE COPPER
Speed : 100.Loopback: NONE
Duplex: FULL,Negotiation: DISABLE
Md1 : AUTO
Last 300 seconds input rate 24 bits/sec, 0 packets/sec
Last 300 seconds output rate 24 bits/sec, 0 packets/sec
- A. The working rate of this interface is 1Gbps
- B. The MAC address of the interface is 00e0-fc22-4fff
- C. The MTU value of this interface is 1000
- D. The IP address of the interface is 10.0.12.2/24
Answer: B,C,D
NEW QUESTION # 79
On interfaces that use PPP as the data link layer protocol, you can configure static routes by specifying the next hop address or outbound interface.
- A. True
- B. False
Answer: A
NEW QUESTION # 80
The OSI reference model from high-level to bottom-level is ().
- A. Application layer, presentation layer, session layer, transport layer, network layer, data link layer, physical layer
- B. Application layer, transport layer, network layer, data link layer, physical layer
- C. Application layer, session layer, presentation layer, transport layer, network layer, data link layer, physical layer
- D. Application layer, presentation layer, session layer, network layer, transport layer, data link layer, physical layer
Answer: A
NEW QUESTION # 81
The router running the OSPF protocol reaches the FULL state first, and then synchronizes the LSDB.
- A. True
- B. False
Answer: B
NEW QUESTION # 82
If STP is not turned on for the network composed of switches, there must be a Layer 2 loop.
- A. TRUE
- B. False
Answer: A
NEW QUESTION # 83
The configuration of the country code will affect the actual transmission frequency and maximum transmission power.
- A. True
- B. False
Answer: A
NEW QUESTION # 84
CSS refers to the combination of two switch devices that support cluster features and logically combine them into one switch device.
- A. FALSE
- B. TURE
Answer: B
NEW QUESTION # 85
In the network shown in the figure, the administrator hopes that all hosts cannot access the web service (the port number is 80), and other services are normally accessed, so in the interface configuration of G0/0/1, traffic-filtar outbound needs to define which ACL rule?
- A. acl number 3001 rule 5 deny udp destination-port eq www rule 10 permit ip #
- B. acl number 3003 rule 5 permit ip rule 10 deny udp destination-port eq www #
- C. acl number 3000 rule 5 deny tcp destination-port eq www rule 10 permit ip #
- D. acl number 3002 rule 5 permit ip rule 10 deny tcp destination-port eq www #
Answer: C
NEW QUESTION # 86
On the VRP platform, the default protocol priority of routes in the direct routing, static routing, RIP, OSPF area is:
- A. Direct routing,OSPF,Static routing,RIP
- B. Direct routing,Static routing,RIP,OSPF
- C. Direct routing,RIP,Static routing,OSPF
- D. Direct routing,OSPF,RIP,Static routing
Answer: A
NEW QUESTION # 87
As shown in the figure, the correct description of this network topology is ().
- A. There are 6 broadcast domains in this network
- B. There are 2 broadcast domains in this network
- C. There are 12 conflict domains in this network
- D. There are 6 collision domains in this network
Answer: B
NEW QUESTION # 88
A network engineer prompts the following information when entering the command line:
Error: Unrecognized command found at ' ^ ' position. Which of the prompt information is correct?
- A. Input command is not clear
- B. No keyword found
- C. Wrong parameter type
- D. The input command is incomplete
Answer: B
NEW QUESTION # 89
VRP operating platform, which of the following commands can only view static routes?
- A. display ip routing-table verbose
- B. display ip routing-table protocol static
- C. display ip routing-table statistics
- D. display ip routing-table
Answer: B
NEW QUESTION # 90
Which of the following commands can modify the device name to huawei?
- A. Do name Huawei
- B. Hostname Huawei
- C. Rename Huawei
- D. Sysname Huawei
Answer: D
NEW QUESTION # 91
In order to join the wireless network STA needs to obtain wireless network information first. Which of the following messages is used by the STA to actively obtain the SSID information?
- A. Join
- B. Beacon
- C. Probe
- D. Discovery
Answer: C
NEW QUESTION # 92
Huawei ARG3 series routers have all SNMP versions (SNMPv1, SNMPv2c and SNMPv3) by default.
- A. True
- B. False
Answer: A
NEW QUESTION # 93
......
H12-811-ENU Exam Questions and Valid PMP Dumps PDF: https://www.topexamcollection.com/H12-811-ENU-vce-collection.html
Huawei H12-811-ENU Certification Real 2023 Mock Exam: https://drive.google.com/open?id=1I15hbDCKYc_7OzwGdPu4LuoGicUuDAX4
