Pass CCNP Security 300-730 exam [Mar 23, 2022] Updated 100 Questions
Cisco 300-730 Actual Questions and 100% Cover Real Exam Questions
Target Audience
300-730 exam targets professionals in the technology space who would like to sharpen and assess their understanding in respect to VPNs. Some of the individuals who should consider it are mostly candidates for CCNP Security, including specialists like network security engineers and channel partners. In the long run, this test is ideal for all people working with VPN and related technologies.
NEW QUESTION 52
A network engineer must design a remote access solution to allow contractors to access internal servers. These contractors do not have permissions to install applications on their computers. Which VPN solution should be used in this design?
- A. IKEv2 AnyConnect
- B. Clientless
- C. Port forwarding
- D. SSL AnyConnect
Answer: B
NEW QUESTION 53
An engineer has integrated a new DMVPN to link remote offices across the internet using Cisco IOS routers. When connecting to remote sites, pings and voice data appear to flow properly, and all tunnel stats show that they are up. However, when trying to connect to a remote server using RDP, the connection fails. Which action resolves this issue?
- A. Add RDP port to the extended ACL.
- B. Replace certificate on the RDP server.
- C. Change DMVPN timeout values.
- D. Adjust the MTU size within the routers.
Answer: D
NEW QUESTION 54
Which VPN technology must be used to ensure that routers are able to dynamically form connections with each other rather than sending traffic through a hub and be able to advertise routes without the use of a dynamic routing protocol?
- A. FlexVPN
- B. DMVPN Phase 3
- C. DMVPN Phase 2
- D. GETVPN
Answer: B
NEW QUESTION 55 
Refer to the exhibit. The customer can establish a Cisco AnyConnect connection without using an XML profile.
When the host "ikev2" is selected in the AnyConnect drop down, the connection fails. What is the cause of this issue?
- A. Primary protocol should be SSL.
- B. UserGroup must match connection profile.
- C. The IP address is incorrect.
- D. The HostName is incorrect.
Answer: B
Explanation:
Section: Troubleshooting using ASDM and CLI
Explanation/Reference: https://community.cisco.com/t5/security-documents/anyconnect-xml-settings/ta-p/3157891
NEW QUESTION 56
A Cisco AnyConnect client establishes a SSL VPN connection with an ASA at the corporate office. An engineer must ensure that the client computer meets the enterprise security policy. Which feature can update the client to meet an enterprise security policy?
- A. Cisco Secure Desktop
- B. Basic Host Scan
- C. Endpoint Assessment
- D. Advanced Endpoint Assessment
Answer: D
Explanation:
Section: Remote access VPNs
NEW QUESTION 57
Which VPN does VPN load balancing on the ASA support?
- A. IPsec site-to-site tunnels
- B. Cisco AnyConnect
- C. VTI
- D. L2TP over IPsec
Answer: B
NEW QUESTION 58
Refer to the exhibit.
Upon setting up a tunnel between two sites, users are complaining that connections to applications over the VPN are not working consistently. The output of show crypto ipsec sa was collected on one of the VPN devices. Based on this output, what should be done to fix this issue?
- A. Enable perfect forward secrecy.
- B. Lower the tunnel MTU.
- C. Make an adjustment to IPSec replay window.
- D. Specify the application networks in the remote identity.
Answer: B
NEW QUESTION 59
Which feature of GETVPN is a limitation of DMVPN and FlexVPN?
- A. design for use over public or private WAN
- B. enabled use of ESP or AH
- C. no requirement for an overlay routing protocol
- D. sequence numbers that enable scalable replay checking
Answer: C
Explanation:
Section: Secure Communications Architectures
Explanation/Reference:
NEW QUESTION 60
After a user configures a connection profile with a bookmark list and tests the clientless SSLVPN connection, all of the bookmarks are grayed out. What must be done to correct this behavior?
- A. Apply the bookmark to the correct group policy.
- B. Verify HTTP/HTTPS connectivity between the Cisco ASA and the web server.
- C. Specify the correct port for the web server under the bookmark.
- D. Configure a DNS server on the Cisco ASA and verify it has a record for the web server.
Answer: D
NEW QUESTION 61 
Refer to the exhibit. Client 1 cannot communicate with client 2. Both clients are using Cisco AnyConnect and have established a successful SSL VPN connection to the hub ASA. Which command on the ASA is missing?
- A. dns-server value 10.1.1.3
- B. same-security-traffic permit inter-interface
- C. same-security-traffic permit intra-interface
- D. dns-server value 10.1.1.2
Answer: C
Explanation:
Section: Troubleshooting using ASDM and CLI
NEW QUESTION 62
Which two changes must be made in order to migrate from DMVPN Phase 2 to Phase 3 when EIGRP is configured? (Choose two.)
- A. Disable EIGRP next-hop-self on the hub.
- B. Add NHRP shortcuts on the hub.
- C. Add NHRP redirects on the hub.
- D. Add NHRP redirects on the spoke.
- E. Enable EIGRP next-hop-self on the hub.
Answer: A,C
NEW QUESTION 63
Which technology is used to send multicast traffic over a site-to-site VPN?
- A. GRE over IPsec on FTD
- B. GRE tunnel on ASA
- C. IPsec tunnel on FTD
- D. GRE over IPsec on IOS router
Answer: A
Explanation:
Section: Secure Communications Architectures
NEW QUESTION 64
Which technology works with IPsec stateful failover?
- A. HSRP
- B. VRRP
- C. GRE
- D. GLBR
Answer: A
NEW QUESTION 65
Which two types of SSO functionality are available on the Cisco ASA without any external SSO servers? (Choose two.)
- A. NTLM
- B. OAuth 2.0
- C. SAML
- D. Kerberos
- E. HTTP Basic
Answer: A,E
NEW QUESTION 66 
Refer to the exhibit. A site-to-site tunnel between two sites is not coming up. Based on the debugs, what is the cause of this issue?
- A. A certificate fragmentation issue occurs between both sides.
- B. An authentication failure occurs on the router.
- C. An authentication failure occurs on the remote peer.
- D. UDP 4500 traffic from the peer does not reach the router.
Answer: D
Explanation:
Section: Troubleshooting using ASDM and CLI
NEW QUESTION 67 
Refer to the exhibit. The customer can establish a Cisco AnyConnect connection without using an XML profile. When the host "ikev2" is selected in the AnyConnect drop down, the connection fails. What is the cause of this issue?
- A. Primary protocol should be SSL.
- B. UserGroup must match connection profile.
- C. The IP address is incorrect.
- D. The HostName is incorrect.
Answer: B
Explanation:
Section: Troubleshooting using ASDM and CLI
Explanation/Reference: https://community.cisco.com/t5/security-documents/anyconnect-xml-settings/ta-p/3157891
NEW QUESTION 68
Refer to the exhibit.
What is a result of this configuration?
- A. Spoke 2 fails the authentication because the remote authentication method is incorrect.
- B. Spoke 1 passes the authentication to the hub and successfully proceeds to phase 2.
- C. Spoke 2 passes the authentication to the hub and successfully proceeds to phase 2.
- D. Spoke 1 fails the authentication because the authentication methods are incorrect.
Answer: D
NEW QUESTION 69
Which redundancy protocol must be implemented for IPsec stateless failover to work?
- A. HSRP
- B. VRRP
- C. SSO
- D. GLBP
Answer: A
NEW QUESTION 70
......
Exam Topics
300-730 assesses you to see how well you have grasped concepts and skills regarding the domains included in the syllabus. These are as follows:
- Troubleshooting with ASDM & CLI
- Remote access VPNs
- Secure architectures for communications
- Site to site VPNs targeting routers as well as firewalls
Although these are the main areas that you could get tested for in 300-730 exam, other related topics may come up in the exam. As such, you must study extensively and use all available resources to acquire the needed knowledge and be able to handle any possible questions.
Cisco 300-730 Real 2022 Braindumps Mock Exam Dumps: https://www.topexamcollection.com/300-730-vce-collection.html
300-730 Free Exam Questions and Answers PDF Updated on Mar-2022: https://drive.google.com/open?id=1oiPpFiKIXNgdDsNWnlumR5m1M9b1Ezws

