[Nov-2022] Get 100% Real Free Nutanix Certified Master NCM-MCI-5.15 Sample Questions
Accurate NCM-MCI-5.15 Questions with Free and Fast Updates
NEW QUESTION 11
While creating an image placement policy on the organizations AOS 5.15-based Nutanix cluster, the administrator wants to ensure there are no restrictions on using the selected images on clusters outside of the identified set.
What type of Policy Enforcement must the administrator choose?
- A. External
- B. Hard
- C. Soft
- D. Internal
Answer: C
Explanation:
NEW QUESTION 12
A customer has two mission-critical applications and needs to have them backed up to a remote location. The remote location is connected using a leased line and has an average latency of 7 ms.
Which Nutanix technology will provide the shortest RPO possible?
- A. NearSync
- B. Leap
- C. Asyn&DR
- D. Metro Availability
Answer: A
Explanation:
Explanation
Ref:
https://portal.nutanix.com/page/documents/solutions/details?targetId=BP-2005_Data_Protection:BP-2005_Data_
NEW QUESTION 13
Refer to the exhibit.
What is the purpose of eth2 on the CVMs?
- A. iSCSI connectivity
- B. RDMA Network Segmentation
- C. Network Segmentation
- D. Remote site connectivity
Answer: C
Explanation:
Explanation
Ref: https://next.nutanix.com/installation-configuration-23/backplane-network-in-aos-5-5-27291
NEW QUESTION 14
An administrator has a custom backup application that requires a 2TB disk and runs in Windows. Throughput is considerably lower than expected.
The application was installed on a VM with the following configuration:
* Four vCPUs with one core/vCPU
* 4GB of Memory
* One 50GB vDisk for the Windows installation
* One 2TB vDisk for the application
What is the recommended configuration change to improve throughput?
- A. Increase the vCPUs assigned to the VM
- B. Add 4GB of memory to the VM
- C. Increase the number of cores per vCPU
- D. Span the 2TB disk across four vDisks
Answer: A
NEW QUESTION 15
An administrator configures authentication in Prism Central (PC) for the NTNX-Admins group. Users report that they are unable to log in. The administrator confirms that the Active Directory (AD) settings in PC are correct.
Which condition could result in this behavior?
- A. The users must be added to the Domain Admins AD group.
- B. The Local authentication type must also be selected in PC.
- C. A client chap certificate must also be added in PC.
- D. A role mapping needs to be associated with the AD group.
Answer: D
Explanation:
Explanation
Ref:
https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-Prism-v5_10:mul-security-role
NEW QUESTION 16
Refer to the exhibit.
What is the purpose of eth2 on the CVMs?
- A. iSCSI connectivity
- B. RDMA Network Segmentation
- C. Network Segmentation
- D. Remote site connectivity
Answer: B
Explanation:
Explanation
Ref: https://next.nutanix.com/installation-configuration-23/backplane-network-in-aos-5-5-27291
NEW QUESTION 17
An administrator wants to utilize Network Visualization to monitor the physical and logical network on the Nutanix cluster. The first-hop switch has LLDP enabled. The network switch information is still not being displayed.
What is causing this problem?
- A. The ISL between switches is not configured.
- B. br0 and br1 are not defined.
- C. The cluster is using RDMA-enabled NICs.
- D. SNMP is not configured properly.
Answer: D
Explanation:
Explanation
ref:
https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v55:wc-network-visual
NEW QUESTION 18
A VM does not have enough resources for the demand, which leads to performance bottlenecks. The VM is exhibiting one or more of following baseline values, based on the past 30 days:
* CPU usage > 90% (moderate), 95% (high)
* CPU ready time > 5%, 10%
* Memory usage > 90%, 95%
* Memory swap rate > 0 Kbps (no moderate value)
Which type of VM is being described?
- A. Over-provisioned VM
- B. Bully VM
- C. Constrained VM
- D. Inactive VM
Answer: C
Explanation:
Explanation
Ref:
NEW QUESTION 19
An administrator is implementing a VDI solution. The workload will be a series of persistent desktops in a dedicated storage container within a four-node cluster. Storage optimizations should be set on the dedicated storage container to give optimal performance including during a node failure event.
Which storage optimizations should the administrator set to meet the requirements?
- A. Compression and Deduplication
- B. Deduplication and Erasure Coding
- C. Compression, Deduplication, and Erasure Coding
- D. Compression only
Answer: B
Explanation:
Explanation
Ref:
NEW QUESTION 20
A system administrator needs to shut down an AHV node in a Nutanix cluster without causing service disruption. The administrator checks data resiliency and verifies that the cluster can tolerate a node down.
Which three steps should the administrator perform next? (Choose three.)
Answer:
Explanation:
Explanation
1 allow vms 2 sd CVM 3 sd node
NEW QUESTION 21
An administrator is using Nutanix Move to migrate a Windows VM from ESXi to AHV. Automated guest preparation is failing with an error:
Account has UAC enabled error
The administrator is using the local built-in administrator account for the Windows VM Admin approval mode must remain enabled.
What should the administrator do to continue with the migration with Nutanix Move?
- A. Use a Domain Admin account for the Windows VM
- B. Place Windows VM in Maintenance Mode
- C. Follow manual VM preparation guidelines
- D. Reboot the Windows VM and try the migration again
Answer: C
Explanation:
Explanation
https://next.nutanix.com/move-application-migration-19/nutanix-xtract-validation-failed-user-must-belong-in-a
NEW QUESTION 22
An organizations Nutanix Cluster is based on VMware vSphere. The cluster is configured to download software updates automatically. The administration needs to verify and eventually upgrade VMware hypervisor via Prism Ul.
After logging in to Prism, the administrator receives the message shown:
No available versions for upgrade
What is causing the current state?
- A. The cluster is unable to connect to reIease-api.nutanix-ccm:8D.
- B. The environment is running the latest vSphere version, so no update is required.
- C. vSphere binaries need to be manually uploaded.
- D. VMware support has expired, so downloads are not available.
Answer: B
Explanation:
Explanation
ref:
https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v510:upg-hypervisor-up
NEW QUESTION 23
An administrator needs to deploy an application with a large amount of data connected via Nutanix Volumes.
Which two actions should the administrator take when designing the Volume Group? (Choose two.)
- A. Enable RSS (Receive Side Scaling)
- B. Enable thick provisioning on the Volume Group(s)
- C. Distribute workload across multiple virtual disks
- D. Use multiple subnets for iSCSI traffic
Answer: A,C
Explanation:
NEW QUESTION 24
Refer to the exhibit.
After performing ESXi to AHV conversion on a cluster, the alerts shown in the exhibit display on Prism. What should the administrator do to resolve this issue efficiently?
- A. Delete the Protection Domain, create a new Protection Domain, and add the VMs to it
- B. Create a new Protection Domain and add the VMs to rt.
- C. Remove the VMs. create a new Protection Domain, and add VMs to it
- D. Remove VMs from the Protection Domain and add them back in.
Answer: D
NEW QUESTION 25
An administrator is deploying an application that requires maximum I/O throughput for scratch data. The administrator is concerned that the throughput requirement is greater than what can be provided by a single cluster node.
What should the administrator do to meet this requirement?
- A. Create a volume group with one virtual disk attached to the VM
- B. Create several virtual disks attached to the VM's virtual SCSI controller
- C. Create a volume group with several virtual disks and attach to the VM
- D. Create a virtual disk attached to the VM's PCI interface
Answer: C
Explanation:
Explanation
Ref:
https://next.nutanix.com/community-blog-40/scaling-up-vm-storage-performance-on-ahv-volume-group-load-b
NEW QUESTION 26
An administrator is notified that a bare metal database server is down. This database server is being served storage using a Nutanix Volume Group. Upon investigating, the administrator finds that the disks in the database server that map to the vDisks in the volume group have gone offline.
What is causing this issue?
- A. A CVM serving the Volume Group has gone offline.
- B. Port 9443 is blocked in the server firewall.
- C. Port 3260 has been blocked in the server firewall.
- D. The Volume Group Load Balancer has been disabled.
Answer: A
NEW QUESTION 27
An administrator needs to relocate an AHV cluster to a new datacenter during a maintenance window. The cluster will use the same IPs in the new datacenter.
Which two steps should be taken to prepare for this task? (Choose two.)
- A. Shut down all user VMs in the cluster
- B. Relocate the linked LDAP servers
- C. Stop all Nutanix Files clusters
- D. Reconfigure IPMI for the new datacenter
Answer: A,C
Explanation:
Explanation
Ref: https://next.nutanix.com/installation-configuration-23/physical-relocation-of-nutanix-clusters-38403
NEW QUESTION 28
Refer to the exhibit.
An administrator creates a security policy that isolates their financial application from accessing the Internet When viewing the policy in Prism Central, several connections from the application are outbound to the Internet.
What is causing this issue with the policy?
- A. The Activate box was not checked in the rule, so it is not enforcing.
- B. The 0.0.0.0 address was not specified in the outbound rule.
- C. The blocked connections are illustrated for information only.
- D. The policy has been left in monitor mode instead of enforcing mode.
Answer: C
Explanation:
Explanation
https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-Prism-v510:mul-security-polic
NEW QUESTION 29
An administrator needs to evaluate if the existing configuration of Protection Domains meets the specified corporate recovery policy for SQL Data. The corporate policy requires that all SQL Servers be recoverable at the DR site within 30 minutes, and must result in a maximum of 60 minutes of data loss. SQL data must be required.
The protection domain is configured as follows:
* Application consistent snapshots are enabled
* The SQL server VMs are assigned to the Protection Domain as their own Consistency Group
* The Protection Domain schedule is configured as snapshots taken every 90 minutes from 7 am until 8 pm What must be changed to meet the required policy?
- A. Revise the schedule to be 30 minutes
- B. Revise the schedule to be 45 minutes
- C. Revise the schedule to be 60 minutes
- D. Revise the schedule tc be 15 minutes
Answer: C
NEW QUESTION 30
An administrator deploys Exchange on a Nutanix cluster. The administrator creates two containers with RF2 configuration:
* One container for Exchange
* One container for the other VMs
The Exchange VM is experiencing I/O performance issues.
Which changes to Storage Optimization should be used on the Exchange container to enhance I/O performance?
- A. Inline compression and EC-X
- B. Inline compression and Deduplication
- C. Post process Deduplication only
- D. No data reduction
Answer: D
NEW QUESTION 31
A customer recently set up Async Replication between Site A and Site B. The customer wants to conduct a planned failover and clicks Activate on Site B.
The customer then runs the following command on Site A:
ncli pd deactivate_and__destroy_vms name=<protection_domain_name>
What does this do to the customer environment?
- A. VMs are powered off on Site A and must be manually powered on at Site B.
- B. VMs get deleted from Site B. and the protection domain is now Active.
- C. VMs get deleted from Site A and the protection domain is no longer active.
- D. Customer must then manually power off VMs at Site A and power them on at Site B.
Answer: C
Explanation:
Explanation
https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_10:wc-protection-d
NEW QUESTION 32
......
NCM-MCI-5.15 Study Guide Realistic Verified Dumps: https://www.topexamcollection.com/NCM-MCI-5.15-vce-collection.html
Self-Study Guide for Becoming an Nutanix Certified Master - Multicloud Infrastructure (NCM-MCI) 5.15 Expert: https://drive.google.com/open?id=1SaeD9ZggdQ_Jp0RLrbvLpcHZNxifLSKC
