[Nov-2021] Pass VMware 5V0-41.20 Exam in First Attempt Guaranteed!
Full 5V0-41.20 Practice Test and 36 unique questions with explanations waiting just for you, get it now!
NEW QUESTION 16
Scenario 1:
A network administrator is tasked! with enabling SO-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites- One is an Internet-only site and two are Hybrid locations with both internet and MPLS: The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.
Exhibit.
An administrator is attempting to activate two Edge devices at the Chicago branch location. The local technician reports that the Edge devices are not coming online. The Edge devices have been plugged in, powered on, and connected to the correct circuits with an Enhanced HA setup.
What should the local technician check first when troubleshooting the issue?
- A. Verify the link light sequence of the HA ports.
- B. Review color of the LED.
- C. Review the Orchestrator for HA misconfiguration issues.
- D. Verify beep sequence of the Edge devices.
Answer: A
NEW QUESTION 17
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that callquality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Users at multiple branches complain that a highly performant SQL Database cluster residing at the New York Data Center is not responding to database queries or inserts as expected. It is affecting the order management site. A network administrator investigates and finds that traffic from the branches are going through Seattle to reach the SQL Cluster in New York. The design for this SD-WAN network does not call for routing security.
The SQL Cluster is reachable through either Data Center, but for performance reasons, must flow through the New York DC. The network administrator has verified that the routes are not present in the OFC and the BGP neighborship is down in Network Services.
Refer to the Exhibit(s).
Exhibit.
What should the administrator verify?
- A. The BGP Authentication matches on both sides.
- B. The BGP configuration has a filter in place to deny the prefix in Seattle.
- C. Backhauling through the Seattle DC is disabled.
- D. The BGP configuration has a filter in place to deny the prefix in New York.
Answer: C
NEW QUESTION 18
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
When checking connectivity from the San Jose branch, all users report that they can reach certain resources at the main data center. They are unable to reach locations elsewhere. The network administrator investigates and first looks at the Overlay Flow Control (OFC) Table.
What should the network administrator look for next to determine what the issue might be?
- A. Check with the local network administrator to see if the routes for the SD-WAN sites are present in San Jose's branch router.
- B. Check Test & Troubleshoot and review a route table dump of the NY hub site.
- C. Determine if OSPF has been configured on the MPLS Routers at the hub.
- D. Check the Global Segment Configuration to see if it has the Routing Flag enabled.
Answer: D
NEW QUESTION 19
Scenario 2:
After completing the branch activation activities for ail required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and blanches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
After deploying the Edge, the security team has determined that traffic from Guest wireless traffic is able to reach resources in the Production network. There should be absolutely no interaction.
How can this be prevented?
- A. Create two subnets, one for Guest wireless traffic and another one for Production traffic.
- B. Segmentation is currently not supported on VeloCloud Edge.
- C. Have Guest wireless and Production traffic in the same segment but different VLANs.
- D. Create an additional segment for Guest wireless traffic and leave the Production traffic in the default global segment.
Answer: B
NEW QUESTION 20
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
Users at a remote office are complaining about poor performance with certain applications. The network administrator has already configured Business Policies based on these requirements.
What is the sequence of parameters that the administrator can check to troubleshoot this problem? (Choose two.)
- A. Change the bandwidth measurement under WAN Overlay Advanced Settings.
- B. Check underlay network (bandwidth, latency, jitter, packet loss).
- C. Under Monitor, check Routing tab.
- D. Review Business Policies configuration and match them against the business requirements.
Answer: B,C
NEW QUESTION 21
Scenario 1:
The Dallas Branch location is having issues getting activated. The local network administrator is aware that the Edge device received a DHCP address and was able to connect to the internet. The Orchestrator is reporting the Edge as Down. No other changes were made post activation.
A network administrator is tasked with enabling SD-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites. One is am Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.
Refer to the Exhibit(s).
What is the cause of this issue?
- A. The Edge will be offline for about 4 hours until it has completed the factory image installation.
- B. The activation link contained incorrect configurations for WAN overlays and WAN interfaces.
- C. The activation link did not specify the updated image location requiring the Edge to be re-activated.
- D. The activation link did not contain any post-activation configuration to allow the Orchestrator to communicate with the Edge.
Answer: C
NEW QUESTION 22
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing; internal and external applications.
Exhibit.
A network administrator is configuring several branches to prefer a single prefix, 10.20.11.0/24, from the Seattle hub over the New York hub for various application performance reasons.
What are two effective ways the administrator can accomplish this? (Choose two.)
- A. Modify the AS Path in New York to be shorter for 10.20.11.0/24.
- B. Modify the AS Path in New York to be longer for 10.20.11.0/24.
- C. In the hub preferred order in the profile, set the Seattle hub to be preferred over New York.
- D. In the OFC 10.20.11.0/24, modify the preferred exit point to be Seattle and pin the route.
Answer: C,D
NEW QUESTION 23
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
Where can the network administrator check to see what routes are present on the London-site Edge?
- A. Log into the VCO > Monitoring > Overlay Flow Control
- B. Log into the VCO > Test & Troubleshoot > Remote Diagnostics > Run "Route Table Dump"
- C. Log into the VCO > Test & Troubleshoot > Remote Diagnostics > Run "List Paths"
- D. Log into the VCO > Configuration > Overlay Flow Control
Answer: B
NEW QUESTION 24
Scenario 3:
After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
Users at a remote office are complaining about poor performance with certain applications. The network administrator has already verified the configuration is correct.
Which two parameters should the administrator review to troubleshoot this issue? (Choose two.)
- A. Look under Monitor, check Business priority tab
- B. Check the flows to verify which Business Policy the traffic of interest is matching
- C. Check the underlay network (bandwidth, latency, jitter, packet loss)
- D. Change the bandwidth measurement under WAN Overlay Advanced Settings
Answer: A,C
NEW QUESTION 25
Scenario 2:
After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
A network administrator has configured a Business Policy to send a specific application directly out an underlay interface. Users have complained of slow responses for that application. While troubleshooting, the network administrator finds the traffic is actually taking an overlay path to another SD-WAN Edge.
What is causing this behavior?
- A. Internet Backha.
- B. The other Edge location is advertising a secure route for the application's subnet.
- C. The underlay path is not available forcing traffic into the overlay.
- D. uI has been configured forcing traffic into the underlay towards the hub.
- E. Configuring Business Policy Direct settings have no affect on traffic flows.
Answer: D
NEW QUESTION 26
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
A network administrator is receiving complaints that a real-time voice application is not performing well, with choppy audio, and dead audio especially during peak traffic times.
What two actions can the administrator take to diagnose and fix the issue? (Choose two.)
- A. Ensure that the realtime application is matching the correct application type using the diagnostics page.
- B. Configure a QoS policy to load balance the realtime traffic across all links.
- C. Check the status of the links using the QoE and Transport tabs for any degraded underlay issues or congestion issues.
- D. Configure a QoS policy to rate limit all traffic during peak times.
Answer: C,D
NEW QUESTION 27
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot gel to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A business policy is created and saved.
How can the network administrator verify the business policy is working?
- A. Check under the Monitor > Business Priority tab for Business policy statistics.
- B. Check under Monitor > Applications tab and check the listing of applications at the bottom of the screen and the category of the type of traffic there.
- C. Executing Route table dump under VCE > Test St Troubleshoot > Remote Diagnostics and select Route Table dump and look for business policy applied in the Route table Dump stats.
- D. Select a VCE > Test & Troubleshoot > Remote diagnostics and select List Active flows and check the flows to see what Business policy is applied under the Business policy column.
Answer: C
NEW QUESTION 28
Scenario 1:
A network administrator is tasked with enabling SD-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of lime. The organization has several branch sites. One is an Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.
Exhibit.
When attempting to activate an Edge, after clicking on the "activation link" in the email that was sent to the network administrator, the Edge's local UI shows as "Internet down". This is preventing the Edge from coming online and being activated. When referring to the output, the network administrator notices that the Edge has received DHCP addressing.
What could be preventing the Edge from coming online?
- A. The next hop does not respond to ICMP pings.
- B. The Edge's profile does not specify the correct Edge Model.
- C. The subnet mask assigned to the Edge is incorrect.
- D. Cloud VPN is not enabled in the AMER Branch profile.
Answer: B
NEW QUESTION 29
Scenario 3:
After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present- The network administrator is informed (hat during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
Which metrics can a network administrator verify in the QoE screen to determine the overall health of Underlay and Overlay?
- A. Jitter, Speed, Latency.
- B. Jitter Packet Loss, Speed.
- C. Jitter, Packet Loss, Latency.
- D. Packet Loss, Latency, Speed.
Answer: A
NEW QUESTION 30
......
Prepare for your VMware certification with the updated TopExamCollection 5V0-41.20 exam questions: https://drive.google.com/open?id=1jwsywZVPGuwycnSXEPCIA3lW2_uiR4fX
Get Latest 5V0-41.20 Dumps Exam Questions in here: https://www.topexamcollection.com/5V0-41.20-vce-collection.html
