Latest HPE6-A69 Pass Guaranteed Exam Dumps Certification Sample Questions [Q16-Q39]

Share

Latest HPE6-A69 Pass Guaranteed Exam Dumps Certification Sample Questions

New HPE6-A69 Test Materials & Valid HPE6-A69 Test Engine


Obtaining the HPE6-A69 certification is a valuable achievement for IT professionals who are seeking to advance their careers in the field of networking. Aruba Certified Switching Expert Written Exam certification demonstrates that the candidate has a deep understanding of Aruba switching technologies and is capable of deploying and managing complex network infrastructures. It is also a prerequisite for the Aruba Certified Switching Expert (ACSE) certification, which is the highest-level certification offered by Aruba Networks.


HPE6-A69 exam is a certification exam that is designed for IT professionals who are seeking to validate their skills in Aruba switching technologies. HPE6-A69 exam is offered by Hewlett Packard Enterprise and it is part of the Aruba Certified Switching Expert (ACSE) certification program. Passing HPE6-A69 exam is a prerequisite for obtaining the ACSE certification, which is recognized by many companies as a valuable and in-demand credential.

 

NEW QUESTION # 16
Which functionalities of ClearPass can be added in a wired network that implements dynamic segmentation?
(Select two.)

  • A. Dynamic VLANs
  • B. Multi Factor Authentication
  • C. Fingerprinting
  • D. Profiling
  • E. Downloadable user Roles

Answer: A,B


NEW QUESTION # 17
A network administrator has deployed the following (partial) configuration:

What is the effect of this policy?

  • A. Only subnet 10.254 2540/24 is allowed to communicate with CoPP-addresses configured on VRF mgmt
  • B. Only subnet 10.254.254.0/24 is allowed to communicate with ip-addresses configured on VRF mgmt
  • C. Only ssh traffic to ip-address in VRF mgmt is restricted to 10 254 254 0/24 network
  • D. COPP traffic is restricted to subnet 10.254.254 0/24

Answer: C


NEW QUESTION # 18
What are the requirements for managing a switch using Aruba NetEdit? (Select two)

  • A. REST access-mode must be set to read-write.
  • B. HTTPS service must be restricted to the management VRF
  • C. Telnet must be disabled on the switch
  • D. The switch user account mat NetEdit uses should have a password.

Answer: A,C


NEW QUESTION # 19
You have removed a member out of the ArubaOS-CX 6300 VSF configuration. The login to the removed member falls. What is true about switch login recovery?

  • A. The zeroize task executes the zeroize.txt from the root of the CF card on the switch
  • B. The task can be executed remotely
  • C. The task requires physical access to the switch
  • D. The zeroize task will remove all user passwords: the configuration remains on the switch

Answer: C


NEW QUESTION # 20
An administrator warns to start a REST API session with an Aruba-OS CX switch Which HTTP method should the Administrator use to start a session?

  • A. LOGIN
  • B. GET
  • C. PUT
  • D. POST

Answer: D


NEW QUESTION # 21
Refer to the exhibit.

A customer has implemented this ArubaOS-CX solution. NetEdit is not present. After a while, the secondary node of the VSX-cluster fails. What is the correct procedure to replace the failed node as quickly as possible?

  • A. Replace the failed unit, boot up the new node without connecting cables, upgrade firmware and configure as secondary vsx node connect iSl and wart for VSX to synchronize After successful recovery, reconnect the remaining cables.
  • B. Replace the failed unit, connect the correct cables, boot up the new node in recovery mode, upgrade firmware and restore, and save config Then, reboot and wait for VSX to synchronize.
  • C. Replace the failed unit, boot up the new node without connecting cables, upgrade firmware, and restore and save config Shutdown all ports, reconnect the correct cables, and enable all ports
  • D. Replace the failed unit, connect the correct cables, boot up the new node and wait for VSX to synchronize configuration and firmware.

Answer: A


NEW QUESTION # 22
An administrator warns to create an ACL.
Permit traffic from 192.168.10, 65 through 192.168.10.94
Permit traffic from 192 168 10 104 through 192 16810.119
deny all other ip traffic
Which configuration is required to accomplish the administrator's goals?
A)

B)

C)

D)

  • A. Option B
  • B. Option A
  • C. Option C
  • D. Option D

Answer: B


NEW QUESTION # 23
A customer wants to implement a new Aruba 6300M 48-port iGbE Class 4 PoE and d-port SFP56 Switch solution. The customer wants to automatically provision devices, connected to the switch with correct settings.
VoIP phones need to be placed in VLAN 10, send out traffic with a VLAN tag. The phone is LLDP-MED capable How can you accomplish this with the least amount of administrative effort?
A)

B)

C)

D)

  • A. Option B
  • B. Option A
  • C. Option C
  • D. Option D

Answer: B


NEW QUESTION # 24
You need to establish a baseline summary of an ArubaOS-CX switch resource utilization after enabling new NAE scripts. How should you define a baseline for switch resource consumption? (Select two.)

  • A. show system memory
  • B. top memory
  • C. top cpu
  • D. show system cpu

Answer: B,C


NEW QUESTION # 25
After a Proof of Concept where NetEdit was used to troubleshoot the network, the customer agrees that NetEdit meets some of its technical goals.
Which technical goals does NetEdit meet? (Select two.)

  • A. Minimize network downtime
  • B. improve the network's scalability
  • C. Simplify network management
  • D. improve the network throughput
  • E. improve reliability of mission-critical applications

Answer: A,E


NEW QUESTION # 26
The rate-limiting QoS feature can be implemented on all ArubaOS-CX platforms However, some features are platform dependent. Which statements are true'' (Select two.)

  • A. Broadcast-rate limiting is supported on all ArubaOS-CX platforms
  • B. Multicast and broadcast rate limits cannot be applied at the same time on the same Interface
  • C. ICMP-Rate limiting is supported on all ArubaOS-CX platforms.
  • D. Unknown unicast rate limiting is supported on all ArubaOS-CX platforms

Answer: B,C


NEW QUESTION # 27
Refer to the following configuration:

How do you configure QoS policies for user traffic in conjunction with user roles in all wired access switches?
(Select two)

  • A. QoS policies should be configured by the Mobility Controller when you need to set to all wired access switches
  • B. With ClearPass and downloadable user roles, you can add QoS policies for user roles
  • C. in a RADIUS server with Aruba Vendor Specific Attribute (VSA) dictionary, you can add QoS policies for user roles.
  • D. Use NetEdit to replicate the configuration of QoS policies to all wired switches

Answer: C


NEW QUESTION # 28
The customer has a requirement for creating security filtering for IPv4 and IPv6 traffic passing through an ArubaOS-CX 6400 switch. Which statement Is true about access-list on the selected switch model?

  • A. Separate IPv4 and IPv6 ACLs need to be created for inbound and outbound traffic
  • B. Only one inbound or outbound ACL can be bound to an interface.
  • C. Routed interfaces can have only inbound ACLs
  • D. IPv4 and IPv6 entries can be used in one ACL with separate rules

Answer: C


NEW QUESTION # 29
A customer with an ArubaOS-CX 6300M switch is having a performance issue on the network and has received complaints about users experiencing intermittent connectivity. After performing troubleshooting it is determined that many of the local websites on the LAN that users are unable to reach are resolved to an invalid MAC address.
What are the minimum steps that should be performed to mitigate this condition? (Select two)

  • A. Implement arp ACLs to define trusted MAC address to IP bindings
  • B. Enable 'arp inspection untrusted on the end-user physical pons
  • C. Enable 'arp inspection' on the end-user physical ports
  • D. Enable 'arp inspections on the end-user VLAN.
  • E. Implement dhcpv4-snooping

Answer: A,D


NEW QUESTION # 30
A customer would like to utilize some ArubaOS-CX 6300M switches to perform OSPF routing.

All ports are routed, and ECMP is enabled, with other default parameters for OSPF. What will be the result of traffic sent from CLIENT-A to CUENT-B?

  • A. Traffic will be SW3 -> SW-1 -> Sw-2 & SW3 -> SW-4 -> SW-2
  • B. Traffic will be SW3 -> SW-1 -> sw-4 -> SW-2
  • C. Traffic will be SW3 -> SW-4 -> SW-2.
  • D. Traffic win be SW3 -> SW-1 -> sw-2.

Answer: B


NEW QUESTION # 31
The customer is implementing new ArubaOS-CX 6300 switches into an environment that has third-party switches and uses centralized authentication from Microsoft Active Directory and TACACS* servers What would be a valid configuration requirement for ArubaOS-CX switches for centralized user authentication?

  • A. Importing a TACACS server certificate for TLS authentication into the switch
  • B. Using a PAM extension for LDAP authentication with Active Directory Server.
  • C. Enabling the active directory VSA in the switch for radius authentication
  • D. Defining a TACACS server group for authentication in the switch configuration

Answer: C


NEW QUESTION # 32
Match the repotted status to the Aruba 8325 issue (Each option may Be used once more than once, or not at all)

Answer:

Explanation:


NEW QUESTION # 33
A client connected to Aruba CX 6300 on Port vt/2 Is having issues connecting to a remote destination 10 100
10 62 port 443. How should you get session-specific diagnostic information about this connection?

  • A. Run tcpdump -interface "1/1/2" host 10.100 10.62 to capture the session
  • B. Enter diag-mode and execute tcpdump ip.addr==10.100.10.62.
  • C. Use diag utilities tcpdump destination-prefix 10 100 10.62/32 to capture the session
  • D. Use diag utilities tcpdump desttnation-ip 10 10010.62 to capture the session

Answer: C


NEW QUESTION # 34
Which MAC address is valid for use as a VSX System-MAC address?

  • A. AB:00:04:00:FF:00
  • B. FF:00:00:00:00:00
  • C. 01:00:5E40:10.01
  • D. 0A:00:00.00.00

Answer: D


NEW QUESTION # 35
You have designed a new wired solution for a customer that uses gateways and Dynamic Segmentation Which statements about User-Based Tunneling are true? (Select two)

  • A. In U8T, the switch performs user authentication.
  • B. in UBT, the switch sends user role Information to Aruba Gateway
  • C. UBT is supported only with Aruba Gateway standalone
  • D. in UBT, the Aruba Gateway performs user authentication
  • E. In UBT, the Aruba Gateway assigns the Primary user role

Answer: C,D


NEW QUESTION # 36
What are two valid steps in a Proof of Concept plan? (Select two)

  • A. Development of the items to Be tested
  • B. Engineering a proposed solution
  • C. Acceptance of the proposed solution
  • D. Definition of success criteria

Answer: A,D


NEW QUESTION # 37
A customer with an ArubaOS-CX 6300M switch is having a performance issue on the network and has received complaints about users experiencing intermittent connectivity. After performing troubleshooting it is determined that many of the local websites on the LAN that users are unable to reach are resolved to an invalid MAC address What are the minimum steps that should be performed to mitigate this condition? (Select two.)

  • A. implement dhcpv4-shooping.
  • B. Enable 'arp inspection' on the end-user physical ports
  • C. Implement ARP ACLs to define trusted MAC address to IP bindings
  • D. Enable 'arp inspection' on the end-user VLAN
  • E. Enable 'arp inspection untrusted' on the end-user physical ports

Answer: C,D


NEW QUESTION # 38
Refer to the exhibit.

Aruba CX 6300 switch has routes in three different VRFs as per the example above. The user needs to leak routes between VRF Secure and VRF Dev. and also between VRF default and VRF Dev The customer Is not able to establish routing between directly connected networks 10.100.50.0/24 and
10.102.26.0/24 Which statement is true regarding the routing troubleshooting?

  • A. Route leaking is supported between non-default VRFs only
  • B. Route leaking between default and non-default VRFs is supported with Aruba CX 8400.
  • C. Multi-protocol BGP routing needs to be defined for route leaking
  • D. Route Distinguisher needs to be set to 1 for default VRF.

Answer: C


NEW QUESTION # 39
......


HP HPE6-A69 certification exam is a valuable certification for IT professionals who are looking to enhance their skills in switching technologies. HPE6-A69 exam covers a wide range of topics related to switching technologies, and passing the exam proves the candidate's expertise in Aruba switching technologies. With the help of study materials and practice exams, candidates can prepare for the exam and increase their chances of passing on the first attempt.

 

HPE6-A69 Sample with Accurate & Updated Questions: https://www.topexamcollection.com/HPE6-A69-vce-collection.html

HPE6-A69 Updated Exam Dumps [2024] Practice Valid Exam Dumps Question: https://drive.google.com/open?id=1082awfjLp3j-B4z47Z5bRhn-Z-fYTwt2