Latest 2022 Realistic Verified NS0-519 Dumps - 100% Free NS0-519 Exam Dumps
Get 2022 Updated Free Network Appliance NS0-519 Exam Questions & Answer
NEW QUESTION 29
Which two SAN components are inventoried by Active IQ OneCollect? (Choose two.)
- A. power supply
- B. storage controller
- C. fans
- D. FC switches
Answer: B,D
NEW QUESTION 30
You have a Windows 2016 server that you want to boot from an iSCSI LUN presented from an AFF A700.
To configure boot from SAN, where would you find the information to populate the NetApp igroup?
- A. server BIOS
- B. network switch
- C. Windows iSCSI initiator
- D. iSCSI HBA BIOS
Answer: C
NEW QUESTION 31
Click the Exhibit button.
The storage system reports that one or more of the FC LIFs have the administratively up and operationally down status. Initiators are unable to connect to the affected LIFs or access LUNs that are presented by those LIFs.
Referring to the exhibit, which command fields provide port login details with the switch?
- A. media-type
- B. status-extended
- C. conn-established
- D. fabric-established
Answer: D
NEW QUESTION 32
You have a new 2-node AFF All SAN Array A700 cluster serving iSCSI LUNs. You are asked to test failures of the front-end protocol connections.
Which two actions satisfy the failure criteria? (Choose two.)
- A. Perform a storage controller failover.
- B. Pull an Ethernet cable from a Linux host.
- C. Disable Snapshot policies.
- D. Pull an Ethernet cable from a storage port with a cluster LIF.
Answer: A,B
NEW QUESTION 33
Click the Exhibit button.
You need to perform an automated non-disruptive upgrade from ONTAP 9.5 to ONTAP 9.7.
Referring to the exhibit, which tool would be used?
- A. OneCollect
- B. AutoSupport OnDemand
- C. Upgrade Advisor
- D. Perfstat
Answer: C
NEW QUESTION 34
An ONTAP administrator is troubleshooting a fabric login issue with a client. The SVM in question uses both FC and NFS protocols.
In this scenario, what would be the least disruptive operation?
- A. Use ONTAP System Manager to disable and then re-enable the LIF port in the SVM.
- B. Use ONTAP System Manager to stop and then restart the SVM.
- C. Use the command line to stop and start the FCP service on the cluster.
- D. Reboot the Brocade switch.
Answer: D
NEW QUESTION 35
What information should you document about your storage fabrics? (Choose two.)
- A. zoning configuration
- B. igroup name
- C. name service
- D. Inter-Switch Links (ISLs)
Answer: A,D
NEW QUESTION 36
An administrator is asked to provide enhanced security measures to an iSCSI LUN using the Challenge Handshake Authentication Protocol (CHAP) with the iscsi security create command.
In this scenario, for which two objects should the administrator configure CHAP? (Choose two.)
- A. for the iSCSI LUN
- B. for the target IQN or EUI
- C. for the initiator IQN or EUI
- D. for the volume containing the iSCSI LUN
Answer: A,C
NEW QUESTION 37
You must ensure that a cluster that uses FabricPool has high availability,
What is required to accomplish this task?
- A. a local failover policy for intercluster LIFs
- B. four cluster LIFs
- C. an IPspace that is dedicated to the FabricPool
- D. a cloud bucket
Answer: A
NEW QUESTION 38
An administrator is testing a newly deployed SAN configuration and wants to simulate a node failure by administratively taking all FC physical ports down on a node that is serving data.
In this scenario, what should the administrator observe?
- A. Host multipath drivers use any indirect path on the cluster to serve data.
- B. Host multipath drivers use the HA partner's direct paths to serve data.
- C. ALUA path states change to use the direct paths of the HA partner to serve data.
- D. ANA path states change to use the direct paths of the HA partner to serve data.
Answer: A
NEW QUESTION 39
Click the Exhibit button.
An administrator enabled the FC protocol on an SVM and created a LUN for a Windows Server 2019 server. After a rescan, the LUN is not visible on the host.
Referring to the exhibit, which two steps must the administrator take to solve this problem? (Choose two.)
- A. Create an igroup, add the iSCSI IQN, and then map the igroup to the LUN.
- B. Create an igroup, add the WWPN of the host initiator, and then map the igroup to the LUN.
- C. Disable NPIV on the switch.
- D. Enable NPIV on the switch.
Answer: B,D
NEW QUESTION 40
What is a prerequisite for enabling SCSI UNMAP support for SAN attached hosts?
- A. The space-slo parameter must be set to none.
- B. The space-allocation parameter must be enabled.
- C. The LUN mapping must be deleted.
- D. The space-slo parameter must be set to semi-thick.
Answer: B
NEW QUESTION 41
Click the Exhibit button.
An administrator has added two nodes to an existing cluster. The administrator created the svfc2 SVM to use FC to present LUNs to hosts. The hosts are unable to see the LUNs that have been presented to them.
Referring to the exhibit, what is the problem?
- A. The FC ports show the status of admin down.
- B. The FC service on the SVM has been stopped.
- C. The FC protocol needs to be added to the allowed protocols list.
- D. The UTA mode change Is pending a reboot.
Answer: D
NEW QUESTION 42
Click the Exhibit button.
You have an 8-node AFF A800 ONTAP 9.7 cluster. You have sixteen SVMs that serve NVMe namespaces using two 32 Gb FC ports per AFF A800 controller.
Referring to the exhibit, what is the maximum number of NVMe data LIFs that are supported on this cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 43
Click the Exhibit button.
Referring to the exhibit, which WWPN would you add to a zone set to provide access to a LUN hosted in ONTAP?
- A. 20:00:00:00:c9:43:f2:9e
- B. 20:lb:00:a0:98:13:d5:d4
- C. 50:0a:09:81:87:09:3d:96
- D. 10:00:00:00:c9:43:f2:9e
Answer: D
NEW QUESTION 44
Click the Exhibit button.
Referring to the exhibit, which two Fibre Channel names should you zone on the FC switch to provide connectivity to the LUN? (Choose two.)
- A. 20:00:00:50:56:9c:16:cc
- B. 20:01:00:50:56:9c:16:cc
- C. 50:0a:09:82:9c:7a:4e:00
- D. 50:0a:09:82:9c:16:cc:00
Answer: A,B
NEW QUESTION 45
You have a 4-node AFF A400 cluster serving iSCSI and FC LUNs. You are asked to tier Snapshot copy data from the SSDs to both Azure Blob storage and Amazon S3. The two sets of Snapshot copies must be managed by ONTAP software so that they are accessible for cloning and replication.
In this scenario, which NetApp technology accomplishes this task?
- A. Fabric Pool
- B. Flash Pool
- C. MetroCluster
- D. Cloud Sync
Answer: A
NEW QUESTION 46
Click the Exhibit button.
A customer has a 4-node AFF A700 cluster that uses ONTAP 9.7. The customer's environment has the Emulex LP31004-M6 and Emulex LPe32002-M2 HBAs.
Referring to the exhibit, using the NVMe protocol, which two host operating systems would be supported? (Choose two.)
- A. RHEL 7.5 64-bit
- B. SLES 12 SP3 64-bit
- C. Microsoft Windows Server 2012 R2
- D. SLES 15 64-bit
Answer: B,D
NEW QUESTION 47
An administrator is designing a SAN solution.
What are two considerations when completing this task? (Choose two.)
- A. identifying the maximum number of paths that are supported by a multipath driver
- B. limiting the number of paths to eight paths per node
- C. limiting the number of paths to eight paths per LUN
- D. identifying the maximum number of paths that are supported by a host operating system
Answer: A,D
NEW QUESTION 48
You are connecting an ISL between two Brocade switches on ports 20 and 21.
Which port-channel type should you configure?
- A. E_port
- B. FL_port
- C. U_port
- D. F_port
Answer: A
NEW QUESTION 49
You are asked to increase the size of your existing 4-node FAS8060 cluster running ONTAP 9.7 software with four additional AFF A700 nodes.
Which tool enables you to confirm that this will be a valid addition?
- A. Hardware Universe (HWU)
- B. Active IQ
- C. Active IQ Config Advisor
- D. Active IQ OneCollect
Answer: A
NEW QUESTION 50
You have a 2-node AFF A400 serving FC LUNs. You are asked to make an instant-writable copy of a LUN in a deduplicated volume. The writable copy must not take additional space.
In this scenario, which two ONTAP features would be used? (Choose two.)
- A. clone split
- B. LUN move
- C. file clone
- D. volume clone
Answer: C,D
NEW QUESTION 51
An administrator wants to connect a DS460C disk shelf to a FAS9000.
Which two statements are correct in this scenario? (Choose two.)
- A. A C13/C14 power cable and compatible rack power distribution unit are required.
- B. A C19/C20 power cable and compatible rack power distribution unit are required.
- C. A Telco rack is required
- D. A deep rack is required
Answer: A,D
NEW QUESTION 52
......
NS0-519 Dumps PDF and Test Engine Exam Questions: https://www.topexamcollection.com/NS0-519-vce-collection.html
