Cisco 500-220 Practice Test Pdf Exam Material
500-220 Answers 500-220 Free Demo Are Based On The Real Exam
The Cisco 500-220 exam is intended for professionals who work with or plan to work with Cisco Meraki solutions, including network engineers, network administrators, system engineers, solutions architects, and technical support personnel. Passing this exam is a significant achievement that demonstrates your proficiency in Meraki technologies and your ability to design and implement complex network solutions using these technologies. It is also a valuable credential that can help you advance your career and increase your earning potential.
NEW QUESTION # 33
Which information do the MXs in a High Availability pair share?
- A. time synchronization state
- B. DHCP association database
- C. stateful firewall database
- D. spanning-tree state
Answer: D
NEW QUESTION # 34
Which configuration step is necessary when automatic updating is required of iOS apps provisioned through Systems Manager that are found in the App Store?
- A. Create a profile with automatic update enabled and apply it to iOS devices.
- B. Configure automatic updating of iOS devices in the Meraki installed profile.
- C. Create a security policy that enables automatic updates.
- D. No configuration step is necessary; automatic updating is the default behavior.
Answer: C
NEW QUESTION # 35
In an organization that uses the Co-Termination licensing model, which two operations enable licenses to be applied? (Choose two.)
- A. License more devices.
- B. Wait for the devices to auto-renew.
- C. Call Meraki support.
- D. License a network.
- E. Renew the Dashboard license.
Answer: A,E
Explanation:
Reference:
Termination_Licensing_Overview
NEW QUESTION # 36
What are two organization permission types? (Choose two.)
- A. Full
- B. Write-only
- C. Monitor-only
- D. Read-only
- E. Write
Answer: A,D
Explanation:
Reference:
Managing_Dashboard_Administrators_and_Permissions
NEW QUESTION # 37
Which two primary metrics does Meraki Insight use to calculate the Application Performance Score? (Choose two.)
- A. Per-flow Goodput
- B. Application Response Time
- C. Maximum Jitter
- D. Total Bandwidth Usage
- E. Maximum Latency
Answer: A,B
NEW QUESTION # 38
How does a Meraki device behave if cloud connectivity is temporarily lost?
- A. The offline device stops passing traffic.
- B. The offline device reboots every 5 minutes until connection is restored.
- C. The offline device continues to run with its last known configuration until cloud connectivity is restored.
- D. The offline device tries to form a connection with a local backup sever.
Answer: D
NEW QUESTION # 39
When wireless SSIDs are configured in Dashboard, which setting on the Access Control page affects the ability of a 2.4 GHz only client device from associating to the WLAN for the first time?
- A. 802.11r
- B. Content filtering
- C. Dual band operating with Band Steering
- D. Bridge mode
Answer: C
NEW QUESTION # 40
What are two ways peers interact with ports that Auto VPN uses? (Choose two.)
- A. For IPsec tunneling, peers use UDP ports 500 and 4500.
- B. For IPsec tunneling, peers use high TCP ports within the 32768 to 61000 range.
- C. For IPsec tunneling, peers use high UDP ports within the 32768 to 61000 range.
- D. Peers contact the VPN registry at UDP port 9350.
- E. Peers contact the VPN registry at TCP port 9350.
Answer: B,D
Explanation:
Reference:
_Configuration_and_Troubleshooting
NEW QUESTION # 41
Which information is used to calculate whether a WAN link has high usage?
- A. total number of devices that are actively passing traffic
- B. data under Security & SD WAN > Appliance Status > Uplink > Live Data
- C. total historical throughput of an uplink
- D. value under Security & SD WAN > SD WAN & Traffic Shaping > Uplink Configuration
Answer: D
NEW QUESTION # 42
Refer to the exhibit.
The VPN concentrator is experiencing issues. Which action should be taken to ensure a stable environment?
- A. Add a deny any/any firewall rule to the end of the firewall rules.
- B. Physically disconnect all LAN ports.
- C. Remove the connection from Internet 1.
- D. Configure the MX appliance to Routed mode on the Addressing & VLANS page.
Answer: B
NEW QUESTION # 43
Refer to the exhibit.
Which outcome occurs when logging is set to Enabled?
- A. Inbound flows are sent to a configured syslog server if a syslog server configured for flows.
- B. Outbound flows are sent to a configured syslog server if a syslog sender is configured for flows.
- C. This firewall rule is now enabled.
- D. The hits counter within this section is now enabled.
Answer: A
NEW QUESTION # 44
Which API endpoint clones a new Organization?
- A. PUT /organizations/{organizationId}/clone
- B. POST /organizations/{organizationId}/new
- C. POST /organizations/clone/{organizationId}
- D. POST /organizations/{organizationId}/clone
Answer: B
NEW QUESTION # 45
Which type of authentication protocol is used when using OSPF on an MX appliance?
- A. plaintext
- B. SHA-1
- C. certificate
- D. MD5
Answer: D
Explanation:
Reference:
Using_OSPF_to_Advertise_Remote_VPN_Subnets
NEW QUESTION # 46
Refer to the exhibit.
For an AP that displays this alert, which network access control method must be in use?
- A. WPA2-enterprise with my RADIUS server
- B. preshared key
- C. MAC-based access control with RADIUS server
- D. splash page with my RADIUS server
Answer: B
NEW QUESTION # 47
Air Marshal has contained a malicious SSID.
What are two effects on connectivity? (Choose two.)
- A. New clients cannot connect.
- B. New clients can connect.
- C. Currently associated clients stay connected.
- D. Currently associated clients are disconnected.
- E. Currently associated clients are affected by restrictive traffic shaping rules.
Answer: A,D
NEW QUESTION # 48
For which two reasons can an organization become "Out of License"? (Choose two.)
- A. MR licenses that do not match the MR models in the organization
- B. licenses that do not match the serial numbers in the organization
- C. licenses that are in the wrong network
- D. expired device license
- E. more hardware devices than device licenses
Answer: D,E
NEW QUESTION # 49
Company iPads are enrolled in Systems Manager without supervision, and profiles are pushed through Systems Manager.
Which outcome occurs when a user attempts to remove the "Meraki Management" profile on an iPad?
- A. The "Meraki Management" profile cannot be removed.
- B. The "Meraki Management" profile is removed and then pushed automatically by Systems Manager.
- C. The "Meraki Management" profile is removed. All the profiles Systems Manager pushed remain.
- D. The "Meraki Management" profile is removed. All the profiles that Systems Manager pushed are also removed.
Answer: D
NEW QUESTION # 50
Which Meraki Dashboard menu section is accessed to enable Sentry enrollment on an SSID?
- A. Wireless > Configure > Access Control
- B. Wireless > Configure > Splash page
- C. Wireless > Configure > SSIDs
- D. Wireless > Configure > Firewall & Traffic Shaping
Answer: A
NEW QUESTION # 51
Refer to the exhibit.
During a Meraki AP deployment, the default SSID that the exhibit shows is broadcast. What causes this behavior?
- A. An AP cannot connect to the default gateway.
- B. An AP has Site Survey mode enabled.
- C. An AP has never connected to the Meraki Cloud Controller.
- D. An AP does not have a wired connection to the network.
Answer: C
Explanation:
Reference:
Troubleshooting_local_connection_issues_using_default_SSID_on_MR_Access_Points
NEW QUESTION # 52
Which VLAN is used to source pings across the site-to-site VPN when using the MX Live tools?
- A. lowest VLAN ID that is configured and set to YES to use VPN
- B. lowest VLAN ID configured and set to NO to use VPN
- C. highest VLAN ID that is configured and set to NO to use VPN
- D. highest VLAN ID that is configured and set to YES to use VPN
Answer: D
Explanation:
Reference:
Using_the_Ping_Live_Tool
NEW QUESTION # 53
Refer to the exhibit.
What are the Loss and Average Latency statistics based on?
- A. responses that the MX appliance receives on the connectivity-testing IP address that is configured on the Security & SD-WAN > SD-WAN & Traffic Shaping page
- B. responses that the MX appliance receives on the connectivity-testing hostnames on the Insight > Web App Health page
- C. responses that the MX appliance receives on the connectivity-testing IP addresses on the Security & SD- WAN > Firewall page
- D. responses that the MX appliance receives on the connectivity-testing IP addresses on the Help > Firewall info page
Answer: C
NEW QUESTION # 54
Refer to the exhibit.
Which two actions are required to optimize load balancing asymmetrically with a 4:1 ratio between links? (Choose two.)
- A. Change the assigned speeds of WAN 1 and WAN 2 so that the ratio is 4:1.
- B. Enable load balancing.
- C. Set the speed of the cellular uplink to zero.
- D. Add an internet traffic preference that defines the load-balancing ratio as 4:1.
- E. Change the primary uplink to "none".
Answer: B,D
NEW QUESTION # 55
......
500-220 [Jun-2023] Newly Released] Exam Questions For You To Pass: https://www.topexamcollection.com/500-220-vce-collection.html
Cisco 500-220 Exam: Basic Questions With Answers: https://drive.google.com/open?id=1tOioguG2T7U-0E2dvKQv9mvQjNlZaCT6
