2025 Current FCP_FWF_AD-7.4 dumps Preparation through Our Practice Test
100% Reliable Microsoft FCP_FWF_AD-7.4 Exam Dumps Test Pdf Exam Material
NEW QUESTION # 21
What two pieces of information are sent by the wireless controller to FortiPresence about connected smartphones?
(Choose two.)
Response:
- A. Cellular provider
- B. Battery level
- C. MAC address
- D. Signal strength
Answer: C,D
NEW QUESTION # 22
When securing a wireless environment, which measures can help prevent unauthorized access?
Response:
- A. Enabling a guest network
- B. Regularly changing the network name (SSID)
- C. MAC address filtering
- D. Using strong encryption like WPA3
Answer: C,D
NEW QUESTION # 23
Refer to the exhibit.
Why is Radio 3 used for the spectrum analysis? Response:
- A. Radio 1 and Radio 2 are unavailable to run the spectrum analysis.
- B. Radio 3 is the configured dedicated monitoring radio for this FortiAP model.
- C. Only Radio 3 is compatible with the selected band.
- D. The 5 GHz frequency band is available only on Radio 3.
Answer: B
NEW QUESTION # 24
WPA3 encryption is optional when configuring a secure wireless network on FortiGate.
Response:
- A. True
- B. False
Answer: B
NEW QUESTION # 25
What might cause wireless performance issues?
Response:
- A. Interference from other electronic devices
- B. A mismatch in wired network settings
- C. Incorrectly set clock on the wireless controller
- D. AP located too close to client devices
Answer: A
NEW QUESTION # 26
What are the benefits of using SSID hiding in a wireless network?
(Select all that apply)
Response:
- A. Reducing the visibility of the network to unauthorized users
- B. Allowing automatic connection for authorized devices
- C. Enhancing wireless signal strength
- D. Preventing casual scanning of the network
Answer: A,D
NEW QUESTION # 27
Which tools can assist in troubleshooting wireless network issues on FortiGate?
(Select all that apply)
Response:
- A. Encryption key generator
- B. RF spectrum analyzer
- C. DHCP lease tracker
- D. Packet capture analyzer
Answer: B,D
NEW QUESTION # 28
In a packet capture, what might repeated retransmissions indicate?
Response:
- A. The presence of an efficient error correction mechanism
- B. The network functioning at peak performance
- C. DHCP malfunctioning
- D. A probable network congestion or interference issue
Answer: D
NEW QUESTION # 29
VLAN load-balancing features are designed to:
Response:
- A. Secure wireless traffic using encryption.
- B. Distribute traffic across multiple VLANs efficiently.
- C. Enhance wireless signal strength.
- D. Create guest accounts for the network.
Answer: B
NEW QUESTION # 30
A tunnel mode wireless network is configured on a FortiGate wireless controller. Which task must be completed before the wireless network can be used?
Response:
- A. The wireless network interface must be assigned a Layer 3 address
- B. Security Fabric and HTTPS must be enabled on the wireless network interface
- C. The wireless network to Internet firewall policy must be configured
- D. The new network must be manually assigned to a FortiAP profile.
Answer: C
NEW QUESTION # 31
What can result if two APs have overlapping frequencies?
Response:
- A. Faster client device authentication
- B. Enhanced signal strength
- C. Extended DHCP lease time
- D. RF interference
Answer: D
NEW QUESTION # 32
When integrating FortiAP devices with FortiGate, which module in FortiGate is responsible for the provisioning and management?
Response:
- A. Security Module
- B. Network Planning Module
- C. Wireless Controller Module
- D. Threat Analytics Module
Answer: C
NEW QUESTION # 33
When configuring Auto TX Power control on an AP radio, which two statements best describe how the radio responds?
(Choose two.)
Response:
- A. When the AP detects any interference from a trusted neighboring AP stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- B. When the AP detects any wireless client signal weaker than -70 dBm, it will reduce its transmission power until it reaches the maximum configured TX power limit.
- C. When the AP detects any other wireless signal stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- D. When the AP detects PF Interference from an unknown source such as a cordless phone with a signal stronger that -70 dBm, it will increase its transmission power until it reaches the maximum configured TX power limit.
Answer: A,C
NEW QUESTION # 34
What would be a primary concern if rogue APs are not monitored and suppressed in a network?
Response:
- A. Unauthorized access and potential data breaches.
- B. Reduced number of available IP addresses.
- C. Decreased Wi-Fi signal strength.
- D. Inability to detect other rogue APs in the future.
Answer: A
NEW QUESTION # 35
What type of server roles does the FortiPresence VM require to operate on-premises?
(Choose two.)
Response:
- A. Application server
- B. Authentication server
- C. Terminal server
- D. Infrastructure server
Answer: A,D
NEW QUESTION # 36
Six APs are located in a remotely based branch office and are managed by a centrally hosted FortiGate. Multiple wireless users frequently connect and roam between the APs in the remote office.
The network they connect to, is secured with WPA2-PSK. As currently configured, the WAN connection between the branch office and the centrally hosted FortiGate is unreliable.
Which configuration would enable the most reliable wireless connectivity for the remote clients?
Response:
- A. Configure a tunnel mode wireless network and enable split tunneling to the local network
- B. Configure a bridge mode wireless network and enable the Local authentication configuration option
- C. Install supported FortiAP and configure a bridge mode wireless network
- D. Configure a bridge mode wireless network and enable the Local standalone configuration option
Answer: A
NEW QUESTION # 37
FortiAP Cloud can be used to deploy FortiAP devices without the need for on-premises controllers.
Response:
- A. True
- B. False
Answer: A
NEW QUESTION # 38
What is the first step in troubleshooting client connection issues on a wireless network managed by FortiGate?
Response:
- A. Check the SSID broadcast settings
- B. Review the client's signal strength
- C. Verify VLAN configurations
- D. Analyze packet captures
Answer: B
NEW QUESTION # 39
Which tasks should be completed before deploying FortiAP devices?
(Select all that apply)
Response:
- A. Create custom AP profiles
- B. Set up wireless LAN-specific policies
- C. Configure VLANs on SSIDs
- D. Preauthorize APs on the FortiGate
Answer: A,D
NEW QUESTION # 40
Which configurations should be applied to enhance wireless security on FortiGate?
(Select all that apply)
Response:
- A. Enable WIDS profiles for rogue AP detection
- B. Configure WPA3 encryption for SSIDs
- C. Hide SSIDs to reduce visibility
- D. Implement VLAN load-balancing
Answer: A,B,C
NEW QUESTION # 41
Which of the following tools cannot act as a standalone wireless controller?
Response:
- A. FortiGate
- B. FortiPresence
- C. FortiPlanner
- D. FortiAP Cloud
Answer: C
NEW QUESTION # 42
......
Free FCP_FWF_AD-7.4 Dumps are Available for Instant Access: https://www.topexamcollection.com/FCP_FWF_AD-7.4-vce-collection.html
Based on Official Syllabus Topics of Actual Fortinet FCP_FWF_AD-7.4 Exam: https://drive.google.com/open?id=1vfjegY3B5B6Uwl4vfu98s1Yw_ODjjXh9
