[2024] HPE6-A66 Dumps are Available for Instant Access
Valid HPE6-A66 Dumps for Helping Passing HPE6-A66 Exam!
Earning the HP HPE6-A66 certification is an excellent way to demonstrate your knowledge and skills in designing and deploying Aruba wireless networks. It can provide you with the recognition and credibility you need to advance your career in IT, and it can help you stand out in the competitive job market. With the HP HPE6-A66 certification, you can demonstrate your ability to design and deploy secure and reliable wireless networks that meet the needs of modern businesses.
NEW QUESTION # 20
A university department has a program in video processing and editing. Students in the department use Wi-Fi to interact with the video servers. The editing and processing is done by the students accessing and using the video servers. However, the students must then stream their results, via Wi-Fi to their laptops to verify the results. A network architect has determined that no more than 20 APs will be needed for the Wi-Fi solution. Because of the large amount of bandwidth used during the streaming, the Aruba mobility controller solution will need to support 10 Gbps links.
Which solution would cost-effectively meet this customer's requirements?
- A. 7240XM
- B. 0
- C. 1
- D. 2
Answer: B
NEW QUESTION # 21
A company needs an upgrade of its access layer switches. The solution requires that devices connected to the access layer by authenticated and their traffic processed by the firewall features of the Aruba Mobility Controllers. Which solution should the company implement?
- A. Dynamic segmentation
- B. iPsec tunneling
- C. PAPI mobility
- D. GRE tunneling
Answer: B
NEW QUESTION # 22
A company is redesigning their wireless network and will be upgrading all devices to support the latest wireless standards. The company is not near any radar installations. In order to keep wireless NIC power levels as low as possible to reduce interference issues and to take advantage of radar frequency ranges, what IEEE standard should APs support?
- A. S02.11V
- B. 802.11r
- C. S02.11h
- D. 802.11 ax
Answer: D
NEW QUESTION # 23
A network architect is designing a new wired and wireless solution for for a company. The company has two buildings on a campus, which each building has three floors. The campus core will be placed in the basement of Building 1. Each wiring closet has eight strands of multi-mode OM3 grade fiber that connect to a wiring closet of the first floor of the building it is contained, referred to as a main distribution frame (MDF). The maximum distance between a floor's wiring closet and the MDF is 100 feet (30 meters). The maximum distance between the two MDFs and the campus core is no more than 150 feet (45 meters). There are eight strands of multi-mode OM3 grade fiber from these two MDF closets to the campus core.
Based on this information, which type of design should be used and what is the maximum speeds supported all uplinks for the existing the multi-mode fiber?
- A. two-tier and 40 Gbps
- B. three-tier and 10 Gbps
- C. two-tier and 10 Gbps
- D. three-tier and 40 Gbps
Answer: B
NEW QUESTION # 24
A company has two buildings on a campus that are approximately 700 feet (214 meters) apart with a clear line of site. No fiber exists between the buildings; however, there is a need for connecting the networks in the buildings together. The connection between the two buildings will need to support peak rates over 1 Gbps.
Which solution should the company choose that will meet their requirements as well as being cost-effective?
- A. Two outdoor AP 367s
- B. Two outdoor AP 510s
- C. Two outdoor AP 387s
- D. Multi-mode fiber between campus switches
Answer: A
NEW QUESTION # 25
A customer requires a campus core virtualization solution that supports a dual control and management planes, as well as active-active forwarding paths. Which solution would meet the customer's requirements?
- A. VSX
- B. Backplane stacking
- C. VSF
- D. Mesh stacking
Answer: B
NEW QUESTION # 26
A network architect is redesigning a wireless network. The architect begins by analyzing the number of spatial streams supported by APs of various vendors as well as the wireless devices currently in the network, if the company wants to ensure that new wireless design, including user wireless devices, support Multi-User MIMO (MU-MIMO). which standard or standards must the wireless products support?
- A. Only 802.11ax and 8011.ac
- B. Only 802.11ax,802.11ac, 802.11n, and 802.11a
- C. Only 802.11ax
- D. Only 802.11ax,802.1lac, and 802.l1n
Answer: D
NEW QUESTION # 27
A network architect is creating a new wired design for a warehouse building. As a best practice, what length should the architect allow for the service loop in the wiring closets in this environment?
- A. 3-10 feet (1-3 m)
- B. 3 feet (1 m)
- C. 30-60 feet (10-20 m)
- D. 15-30 feet (5-10 m)
Answer: B
NEW QUESTION # 28
A company has chosen an Aruba mobility controller solution for the redesign of their wireless network The design will have two 7205 controllers in a cluster for campus employees and a single VMC-50 virtual controller for remote access via a DMZ. A Mobility Master (MM) is used for centralized license and controller management. All controllers will minimally run ArubaOS 8 4 or later Currently the company has 1.000 employees. There are 30 branch offices that will use RAPs to connect to the DMZ controller. A peak of 100 users concurrently using the VIA client will also connect to the DMZ controller.
How many Aruba LIC-VIA licenses does the company need to purchase for this solution?
- A. 0
- B. 1
- C. 2
- D. 1,030
Answer: D
NEW QUESTION # 29
NewRocket requires a wireless capacity design 30 Aruba 510 APs will be connected to each wiring closet using SmartRate connections. Wireless coverage needs to be provided even if a POE+ switch loses power Because of security concerns, wired video cameras were recently installed throughout the facility. There are 12 of these per floor. 6 per wiring closet. The cameras are 802.11n WiFi capable and have power injectors from which to draw power.
Based on the POE+ needs of the mentioned devices, which solution would meet the POE+ requirements while still providing a redundant and cost-effective Wi-Fi solution for the devices that require POE+ for Building 1, Floor 2?
- A. Two 2930F 24-port POE+ switches
- B. One 3810M 40G 8 HPE Smart Rate switch
- C. One 2930M 48-port POE+ switch
- D. Two 2930M 24-port POE+ switches
Answer: C
NEW QUESTION # 30
A network architect has developed a design for a new Aruba Wi-Fi network that will include a virtual Mobility Master (MM) running the ArubaOS 8.4 operating system that will manage:
* Two clustered 7210 controllers with 600 campus APs
* Two clustered VMC-50 controllers with 75 remote APs
* Wireless IPS
The architect plans on creating user roles and firewall policies on the controllers as well as implementing AirMatch. What would meet the license requirements for this scenario?
- A. LIC-MM-VA-50 (X1), LIC-MC-VA-50 (x2). LIC-AP (X675), PEF (x675), RFP (X675)
- B. LIC-MM-VA-1000 (X1), LIC-MC-VA-50 (x1), LIC-AP (x600). PEF (X600), RFP (x600)
- C. LIC-MM-VA-1000 (X1), LIC-MC-VA-50 (x2), LIC-AP (X675). PEF (X675). RFP <x675)
- D. LIC-MM-VA-1000 (X1). LIC-MC-VA-50 (X1), LIC-AP (x675). PEF (X675), RFP (X675)
Answer: D
NEW QUESTION # 31
A company needs to replace an existing legacy wireless and wired solution with one that supports features like 802 11 ax for APs and logical switching for switches. The company is located on a single floor with two wiring closets. Assume that there will be 10 APs connected via POE+ to each wiring closet, along with 36 wired user connections All switches on a floor should be configured in a single stack. The distance between wiring closets is 100 feet (31 meters).
Which switching solution will minimally provide 10 Gbps uplinks at the most cost-effective price, while still meeting the company's requirements?
- A. 3810M switches
- B. 2930F switches
- C. 2930M switches
- D. 5406R switches
Answer: C
NEW QUESTION # 32
Which two challenges do802.1ig barcode scanners present to a WLAN design? (Select two.)
- A. implementing adequate security measures to ensure PCI compliance
- B. determining the RF channel bandwidth consumed per Barcode scanner
- C. encountering RF interference by devices
- D. roaming between APs
- E. providing consistent performance on all available channels
Answer: A,E
NEW QUESTION # 33
Which AP mode allows an AP to operate autonomously?
- A. IAP
- B. AM
- C. RAP
- D. OCAP
Answer: D
NEW QUESTION # 34
A customer has some employees that travel to various locations, where these employees will need Wi-Fi access at these locations. Because many of these locations do not have wireless support, the employees will need to carry an AP solution with them. Internet connectivity, if it doesn't exist at these locations, will be provided by a national phone company USB wireless card which will be connected to AP. The wireless solution needs minimal bandwidth, but needs to minimally support 802.1 lac wave 1 devices.
Which Aruba AP wireless solution would meet the needs of these employees most effectively and cost efficiently?
- A. 0
- B. 1
- C. 303H
- D. 203R
Answer: D
NEW QUESTION # 35
A network architect is designing a new Wi-Fi solution for a customer The customer currently occupies a one-story building on a small campus. In one part of the building there is an auditorium, where the ceiling height and attenuation is different from the rest of the building. What should the network architect create in VisualRF to identify this difference when planning :ne APs?
- A. Create a Region in the Floorplan View
- B. Spit the Building View into two Floorplan Views
- C. Define the appropriate properties in the Building View
- D. Define the appropriate properties in the Network View
Answer: C
NEW QUESTION # 36
A high-end theater venue will be implementing an Aruba wireless solution using ceiling- and wall-mounted APs. The venue wants to ensure the the APs blend into the ceiling and wall environments. What solution should the customer use to ensure that wireless coverage is not hampered?
- A. Place a strip of tape over the LEDs
- B. Place the APs above the ceiling and behind the walls
- C. Paint the APs to match the ceilings or walls
- D. Order Aruba AP covers for the APs
Answer: B
NEW QUESTION # 37
A customer currently has sets of three Aruba 5406R switches deployed for an access layer in multiple wiring closets in a building They are clustered in a VSF domain The customer wants to set up Multiple Active Detection (MAD) for the OOBM port, as well as use this port for remote management access. To simplify the connectivity, the customer wants to connect these three switches' OOBM ports to a separate switch in the wiring closet for the OOBM connectivity.
Which would be the most cost-effective solution that would meet the customer's requirements?
- A. 5406R
- B. 0
- C. 2930M
- D. 2930F
Answer: B
NEW QUESTION # 38
A customer is purchasing Aruba 555 APs for a new wireless network. The APs will be pre-staged as campus APs (CAPs) and be managed by a controller solution During the pre-staging process, console access to the APs might be necessary Which console connection cable should the customer purchase for the 555 APs?
- A. RS-232
- B. Micro-B USB
- C. USB-A
- D. RJ-45
Answer: B
NEW QUESTION # 39
......
HP HPE6-A66 Certification Exam is ideal for IT professionals who are looking to expand their skillset and advance their career in the wireless networking industry. Aruba Certified Design Associate Exam certification is recognized globally and is highly valued by employers. It is an excellent opportunity for IT professionals to demonstrate their expertise in designing and deploying Aruba wireless networks and become a trusted advisor for their organizations.
Updated HPE6-A66 Dumps Questions For HP Exam: https://www.topexamcollection.com/HPE6-A66-vce-collection.html
UPDATED HP HPE6-A66 Exam Questions & Answer: https://drive.google.com/open?id=1I4QPlhaQiwFtcNTYKGQ9NeGvUjVqiR9c
