Updated Feb 15, 2026 Verified Pass SK0-005 Exam in First Attempt Guaranteed
Free SK0-005 Sample Questions and 100% Cover Real Exam Questions (Updated 492 Questions)
NEW QUESTION # 269
Which of the following actions should a server administrator take once a new backup scheme has been configured?
- A. Overwrite the backups
- B. Run a restore test
- C. Clone the configuration
- D. Check the media integrity
Answer: B
Explanation:
The action that the server administrator should take once a new backup scheme has been configured is to run a restore test. A restore test is a process of verifying that the backup data can be successfully recovered and restored to its original location or a different location. A restore test can help ensure that the backup scheme is working properly, that the backup data is valid and consistent, and that there are no errors or issues during the recovery process. A restore test should be performed periodically and after any changes to the backup configuration or environment.
NEW QUESTION # 270
A technician has moved a data drive from a new Windows server to an older Windows server. The hardware recognizes the drive, but the data is not visible to the OS. Which of the following is the most likely cause of the issue?
- A. The partition is formatted with FAT32.
- B. The disk uses MBR.
- C. The disk uses GPT.
- D. The partition is formatted with ext4.
Answer: C
Explanation:
The most likely cause of the issue is that the disk uses GPT. GPT stands for GUID Partition Table, which is a newer standard for disk partitioning that supports larger disks and more partitions than the older MBR (Master Boot Record) standard1. However, GPT is not compatible with some older operating systems, such as Windows XP or Windows Server 20032. Therefore, if the data drive was formatted with GPT on a new Windows server and then moved to an older Windows server, the older server may not be able to recognize the GPT partitions and access the data on the drive.
The partition being formatted with ext4, FAT32, or MBR are not likely causes of the issue. Ext4 is a file system that is commonly used on Linux-based systems, but it can also be read by Windows with some third- party software3. FAT32 is a file system that is widely compatible with most operating systems and devices, but it has some limitations such as a maximum file size of 4 GB and a maximum partition size of 8 TB4.
MBR is not a file system, but a partitioning scheme that can support various file systems such as NTFS, FAT32, or exFAT5. However, MBR has some disadvantages compared to GPT, such as a maximum disk size of 2 TB and a maximum number of primary partitions of four1.
NEW QUESTION # 271
Which of the following cloud models is BEST described as running workloads on resources that are owned by the company and hosted in a company-owned data center, as well as on rented servers in another company's data center?
- A. Community
- B. Private
- C. Hybrid
- D. Public
Answer: C
Explanation:
Explanation
This is the best description of a hybrid cloud model because it combines both private and public cloud resources. A private cloud is a cloud environment that is owned and operated by a single organization and hosted in its own data center. A public cloud is a cloud environment that is owned and operated by a third-party provider and hosted in its data center. A hybrid cloud allows an organization to leverage both types of cloud resources depending on its needs and preferences.References:https://azure.microsoft.com/en-us/overview/what-is-hybrid-cloud-computing/
NEW QUESTION # 272
An administrator is tasked with building an environment consisting of four servers that can each serve the same website. Which of the following concepts is described?
- A. Network teaming
- B. Direct access
- C. Overprovisioning
- D. Load balancing
Answer: D
Explanation:
Load balancing is a concept that distributes the workload across multiple servers or other resources to optimize performance, availability, and scalability. Load balancing can be implemented at different layers of the network, such as the application layer, the transport layer, or the network layer. Load balancing can use various algorithms or methods to determine how to distribute the traffic, such as round robin, least connections, or weighted distribution.
NEW QUESTION # 273
An administrator is installing a new file server that has four drive bays available. Which of the following RAID types would provide the MOST storage as well as disk redundancy?
- A. RAID 1
- B. RAID 5
- C. RAID 10
- D. RAIDO
Answer: B
Explanation:
RAID 5 is a RAID level that provides striping with parity, which means that data is distributed across all disks with one disk storing parity information for error correction. RAID 5 can tolerate one disk failure without losing data. RAID 5 provides the most storage as well as disk redundancy out of the four RAID levels given, since it only uses one disk for parity and the rest for data. For example, if four 200GB drives are used in a RAID 5 array, the total storage capacity would be 600GB (200GB x 3), while in RAID 0 it would be 800GB (200GB x 4), in RAID 1 it would be 200GB (200GB x 1), and in RAID 10 it would be 400GB (200GB x 2). Reference: https://en.wikipedia.org/wiki/Standard_RAID_levels#RAID_5
NEW QUESTION # 274
An administrator is configuring a host-based firewall tor a server. The server needs to allow SSH, FTP, and LDAP traffic. Which of the following ports must be configured so this traffic will be allowed? (Select THREE).
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
- F. 5
- G. 6
- H. 7
Answer: D,E,F
Explanation:
Explanation
These are the port numbers that must be configured on a host-based firewall for a server that needs to allow SSH, FTP, and LDAP traffic. A port number is a numerical identifier that specifies a communication endpoint for a network protocol or an application. A host-based firewall is a software tool that monitors and controls incoming and outgoing network traffic on a single host based on predefined rules. SSH (Secure Shell) is a protocol that allows secure remote access and file transfer over an encrypted connection. The default port number for SSH is 22. FTP (File Transfer Protocol) is a protocol that allows transferring files between hosts over a network connection. The default port number for FTP is 21. LDAP (Lightweight Directory Access Protocol) is a protocol that allows accessing and managing directory services over a network connection. The default port number for LDAP is 389. References:
https://www.howtogeek.com/190014/virtualization-basics-understanding-techniques-and-fundamentals/
https://www.howtogeek.com/220152/what-is-the-difference-between-127.0.0.1-and-0.0.0.0/
https://www.howtogeek.com/428483/what-is-end-to-end-encryption-and-why-does-it-matter/
NEW QUESTION # 275
A company wants to deploy software to all users, Out very few of men will be using the software at any one point in time. Which of the following licensing models would be BEST lot the company?
- A. Per site
- B. Per core
- C. Per instance
- D. Per concurrent user
Answer: D
Explanation:
Explanation
Per concurrent user licensing is a model that allows a fixed number of users to access the software at any one point in time. This model is best for the company that wants to deploy software to all users, but very few of them will be using the software at any one point in time. This way, the company can save money by paying only for the number of simultaneous users, rather than for every user who has access to the software. Per site licensing is a model that allows unlimited users within a specific location to use the software. Per core licensing is a model that charges based on the number of processor cores on the server where the software is installed. Per instance licensing is a model that charges based on the number of copies of the software running on different servers or virtual machines. References:
https://www.pcmag.com/encyclopedia/term/concurrent-use-license
https://www.techopedia.com/definition/1440/software-licensing
NEW QUESTION # 276
Which of the following symbols is used to write a text description per line within a PowerShell script?
- A. %
- B. &
- C. #
- D. @
Answer: C
Explanation:
The # symbol is used to write a text description per line within a PowerShell script. A text description is also known as a comment, which is a line of code that is ignored by the PowerShell interpreter and serves as documentation or explanation for human readers. The # symbol indicates that everything following it on the same line is a comment and not part of the script commands or expressions. For example:
This is a comment in PowerShellWrite-Host "Hello World" # This command prints Hello World to the console References: CompTIA Server+ Certification Exam Objectives, Domain 6.0: Troubleshooting, Objective 6.3:
Given a scenario, troubleshoot scripting errors using PowerShell commands.
NEW QUESTION # 277
A server administrator has been asked to implement a password policy that will help mitigate the chance of a successful brute-force attack. Which of the following password policies should the administrator implement first?
- A. Lockout
- B. Minimum age
- C. Length
- D. Complexity
Answer: C
Explanation:
Explanation
Password length is the first password policy that the administrator should implement to help mitigate the chance of a successful brute-force attack. A brute-force attack is a method of guessing passwords by trying all possible combinations of characters until the correct one is found. The longer the password, the more combinations there are, and the more time and resources it takes to crack it. Therefore, password length is a key factor in password strength and security.
References: CompTIA Server+ SK0-005 Certification Study Guide, Chapter 3, Lesson 3.2, Objective 3.2
NEW QUESTION # 278
Which of the following describes a configuration in winch both nodes of a redundant system respond to service requests whenever possible?
- A. Failover
- B. Active-active
- C. Fallback
- D. Active-passive
Answer: B
Explanation:
Active-active is a configuration in which both nodes of a redundant system respond to service requests whenever possible. It can improve the performance, availability, and load balancing of the system by distributing the workload among the nodes. However, it also requires more synchronization and coordination between the nodes to avoid conflicts or errors. Verified Reference: [Active-active], [Redundant system]
NEW QUESTION # 279
An analyst is planning a new point-to-point Ethernet connection between a university campus and a newly acquired space downtown that is about 5mi (8km) away. The analyst would like the fastest possible connection speed. Which of the following would best meet the analyst's needs?
- A. 10GBASE-SR 10Gb multimode plenum fiber connection
- B. 10GBASE-T 10Gb copper plenum Ethernet connection
- C. 1000BASE-LX 1Gb single-mode plenum fiber connection
- D. 1000BASE-T 1Gb copper non-plenum Ethernet connection
Answer: C
Explanation:
A 1000BASE-LX 1Gb single-mode plenum fiber connection would best meet the analyst's needs for a new point-to-point Ethernet connection between a university campus and a newly acquired space downtown that is about 5mi (8km) away. A 1000BASE-LX is a type of Ethernet standard that supports data transmission at 1 gigabit per second over single-mode fiber cables using long wavelength lasers. A single-mode fiber cable is a type of optical fiber cable that has a small core diameter and allows only one mode of light to propagate through it. A single-mode fiber cable can transmit data over long distances at high speeds, but it requires more expensive transceivers and connectors than multimode fiber cables. A plenum fiber cable is a type of optical fiber cable that has a special coating that prevents the spread of fire or toxic fumes in case of burning. A plenum fiber cable is suitable for installation in plenum spaces, which are areas used for air circulation in buildings, such as above ceilings or below floors. References: [CompTIA Server+ Certification Exam Objectives], Domain 4.0: Networking, Objective 4.2: Given a scenario involving server networking issues (e.g., network interface card failure), troubleshoot using appropriate tools.
NEW QUESTION # 280
An administrator is upgrading a group of legacy blade servers to the latest version of the hypervisor. After restarting the server, the upgrade is interrupted. The hypervisor is not available, and the update is not successful. Which of the following should the administrator do next to accomplish this upgrade?
- A. Upgrade the blade server's firmware to support the new hypervisor.
- B. Upgrade the blade server's hardware.
- C. Increase the blade server's onboard RAM.
- D. Change the upgrade to a new installation and overwrite the boot drive.
Answer: A
Explanation:
Comprehensive Detailed Explanation with all CompTIA Server+ SK0-005 Study Guide References:Firmware incompatibility is a common issue when upgrading hypervisors, especially on legacy hardware. Upgrading the firmware ensures that the hardware is compatible with the new hypervisor version. This includes updating BIOS, RAID controllers, and network adapters to the latest supported versions.
* A. New installation:Risks data loss and is unnecessary if the issue is firmware-related.
* C. Increasing RAM:May enhance performance but does not resolve compatibility issues.
* D. Hardware upgrade:A last resort if firmware updates do not resolve the problem.
NEW QUESTION # 281
A data center employee shows a driver's license to enter the facility Once the employee enters, the door immediately doses and locks, triggering a scale that then weighs the employee before granting access to another locked door. This is an example of.
- A. RFID.
- B. mantrap.
- C. a bollard
- D. geofencing
Answer: B
Explanation:
Explanation
A mantrap is a security device that consists of a small space with two sets of interlocking doors, such that the first set of doors must close before the second one opens. A mantrap can be used to control access to a data center by verifying the identity and weight of the person entering. A bollard is a sturdy post that prevents vehicles from entering a restricted area. Geofencing is a technology that uses GPS or RFID to create a virtual boundary around a location and trigger an action when a device crosses it. RFID is a technology that uses radio waves to identify and track objects or people. References:
https://www.techopedia.com/definition/16293/mantrap
https://www.techopedia.com/definition/1437/bollard
https://www.techopedia.com/definition/23961/geofencing
https://www.techopedia.com/definition/506/radio-frequency-identification-rfid
NEW QUESTION # 282
A systems administrator deployed a new web proxy server onto the network. The proxy server has two interfaces: the first is connected to an internal corporate firewall, and the second is connected to an internet-facing firewall. Many users at the company are reporting they are unable to access the Internet since the new proxy was introduced. Analyze the network diagram and the proxy server's host routing table to resolve the Internet connectivity issues.
INSTRUCTIONS
Perform the following steps:
1. Click on the proxy server to display its routing table.
2. Modify the appropriate route entries to resolve the Internet connectivity issue.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.
Answer:
Explanation:
NEW QUESTION # 283
A remote physical server is unable to communicate to the network through the available NICs, which were misconfigured. However, the server administrator is still able to configure the server remotely. Which of the following connection types is the server administrator using to access the server?
- A. Virtual administrator console
- B. RDP connection
- C. Out-of-band management
- D. Crash cart access
- E. Local KVM setup
Answer: C
Explanation:
The connection type that the server administrator is using to access the server remotely is out-of-band management. Out-of-band management is a method of accessing and controlling a server through a dedicated network interface or port that is separate from the regular data network. Out-of-band management allows administrators to perform tasks such as rebooting, configuring, troubleshooting, or updating a server even if the server is offline or unresponsive through the regular network. Out-of-band management can use protocols such as IPMI, iLO, DRAC, or BMC. Reference: https://www.ibm.com/cloud/learn/out-of-band-management
NEW QUESTION # 284
Which of the following should a technician verify first before decommissioning and wiping a file server?
- A. Document retention policy
- B. The media destruction method
- C. Asset management documentation
- D. The recycling policy
Answer: C
Explanation:
Before decommissioning and wiping a file server, it's crucial to verify the asset management documentation. This documentation provides detailed records of the server's lifecycle, including procurement, usage, maintenance, and decommissioning information. Ensuring that asset management documentation is up-to-date and accurate is essential before proceeding with the server's decommissioning to maintain proper inventory control, comply with regulatory and organizational policies, and facilitate any potential audits. While the media destruction method, recycling policy, and document retention policy are important considerations in the decommissioning process, verifying asset management documentation is the first step to ensure the server is correctly identified and accounted for in the organization's asset registry.
NEW QUESTION # 285
A systems administrator deployed a new web proxy server onto the network. The proxy server has two interfaces: the first is connected to an internal corporate firewall, and the second is connected to an internet-facing firewall. Many users at the company are reporting they are unable to access the Internet since the new proxy was introduced. Analyze the network diagram and the proxy server's host routing table to resolve the Internet connectivity issues.
INSTRUCTIONS
Perform the following steps:
1. Click on the proxy server to display its routing table.
2. Modify the appropriate route entries to resolve the Internet connectivity issue.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.
Answer:
Explanation:
NEW QUESTION # 286
A remote physical server is unable to communicate to the network through the available NICs, which were misconfigured. However, the server administrator is still able to configure the server remotely. Which of the following connection types is the server administrator using to access the server?
- A. Virtual administrator console
- B. RDP connection
- C. Out-of-band management
- D. Crash cart access
- E. Local KVM setup
Answer: C
Explanation:
Explanation
The connection type that the server administrator is using to access the server remotely is out-of-band management. Out-of-band management is a method of accessing and controlling a server through a dedicated network interface or port that is separate from the regular data network. Out-of-band management allows administrators to perform tasks such as rebooting, configuring, troubleshooting, or updating a server even if the server is offline or unresponsive through the regular network. Out-of-band management can use protocols such as IPMI, iLO, DRAC, or BMC. Reference: https://www.ibm.com/cloud/learn/out-of-band-management
NEW QUESTION # 287
A data center environment currently hosts more than 100 servers that include homegrown and commercial software. The management team has asked the server administrator to find a way to eliminate all company-owned data centers. Which of the following models will the administrator most likely choose to meet this need?
- A. Hybrid
- B. Public
- C. SaaS
- D. Private
Answer: B
Explanation:
A public cloud model will most likely meet the need of eliminating all company-owned data centers. A public cloud is a type of cloud computing service that is provided by a third-party vendor over the internet. A public cloud offers scalability, flexibility, and cost-effectiveness for hosting servers and applications, as the customers only pay for the resources they use and do not have to maintain their own infrastructure. A public cloud can also provide high availability, security, and performance for the servers and applications, as the vendor manages the underlying hardware and software. A public cloud can support various types of services, such as software as a service (SaaS), platform as a service (PaaS), or infrastructure as a service (IaaS). References: [CompTIA Server+ Certification Exam Objectives], Domain 1.0: Server Administration, Objective 1.2: Given a scenario, compare and contrast server roles and requirements for each.
NEW QUESTION # 288
Which of the following symbols is used to write a text description per line within a PowerShell script?
- A. %
- B. &
- C. #
- D. @
Answer: C
Explanation:
Explanation
The # symbol is used to write a text description per line within a PowerShell script. A text description is also known as a comment, which is a line of code that is ignored by the PowerShell interpreter and serves as documentation or explanation for human readers. The # symbol indicates that everything following it on the same line is a comment and not part of the script commands or expressions. For example:
This is a comment in PowerShellWrite-Host "Hello World" # This command prints Hello World to the console References: CompTIA Server+ Certification Exam Objectives, Domain 6.0: Troubleshooting, Objective 6.3:
Given a scenario, troubleshoot scripting errors using PowerShell commands.
NEW QUESTION # 289
A server room contains ten physical servers that are running applications and a cluster of three dedicated hypervisors. The hypervisors are new and only have 10% utilization. The Chief Financial Officer has asked that the IT department do what it can to cut back on power consumption and maintenance costs in the data center. Which of the following would address the request with minimal server downtime?
- A. Reimage the physical servers and retire all ten servers after the migration is complete.
- B. Convert the physical servers to the hypervisors and retire the ten servers.
- C. Unplug the power cables from the redundant power supplies, leaving just the minimum required.
- D. Convert the ten servers to power-efficient core editions.
Answer: B
Explanation:
Explanation: This option would reduce power consumption and maintenance costs by consolidating the physical servers into virtual machines on the hypervisors. This would also free up space and resources in the data center. The other options would either not address the request, increase power consumption, or require more maintenance.
NEW QUESTION # 290
......
CompTIA Server+ Certification Exam is ideal for IT professionals who are responsible for managing and maintaining server infrastructure, such as network administrators, system administrators, and technicians. It covers topics such as server architecture, virtualization, storage, security, disaster recovery, and troubleshooting. SK0-005 exam is vendor-neutral, which means that it does not focus on any specific technology or vendor, making it a valuable certification for IT professionals working in diverse environments.
Download Real CompTIA SK0-005 Exam Dumps Test Engine Exam Questions: https://www.topexamcollection.com/SK0-005-vce-collection.html
Verified SK0-005 Dumps Q&As - SK0-005 Test Engine with Correct Answers: https://drive.google.com/open?id=12nnsHGtd5U9tybwZHay6cueLdLHJIFh5
