Get Dec-2025 Download Latest & Valid Questions For Cisco 300-415 exam
Ensure Success With Updated Verified 300-415 Exam Dumps
Cisco 300-415 (Implementing Cisco SD-WAN Solutions) Exam is a certification exam that focuses on the skills and knowledge required to implement and manage Cisco's Software-Defined Wide Area Network (SD-WAN) solutions. 300-415 exam is designed for network engineers, network administrators, and system administrators who are interested in implementing and managing SD-WAN solutions using Cisco technologies. 300-415 exam is also ideal for professionals who want to validate their skills and knowledge in this area and obtain a Cisco certification.
Cisco 300-415 certification exam is a challenging exam that requires a strong understanding of SD-WAN concepts and technologies. 300-415 exam is designed to test the skills necessary to deploy and manage SD-WAN solutions in a variety of environments. Candidates who pass the exam will have demonstrated their ability to design and implement SD-WAN solutions that can help organizations improve their network performance, reduce costs, and enhance their overall IT infrastructure.
NEW QUESTION # 90
In an AWS cloud, which feature provisions WAN Edge routers automatically in Cisco SD-WAN?
- A. vAnalytics
- B. Cloud app
- C. Network Designer
- D. Cloud OnRamp
Answer: D
Explanation:
Section: Architecture
NEW QUESTION # 91
Refer to the exhibit. An engineer must configure a QoS policy between the hub and site A (spoke) over a standard Internet circuit where traffic shaping is adjusted based on available bandwidth.
Which configuration meets the requirement?
- A.
- B.
- C.
- D.
Answer: D
NEW QUESTION # 92
SIMULATION
Configure individual VRFs for each customer according to the topology to achieve these goals:
R1
R2
SW1
SW2
SW3
- A. U.U
Success rate is 0 percent (0/5)
SW1#ping 192.168.20.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.20.1, timeout is 2 seconds: - B. U.U
Success rate is 0 percent (0/5)
Same Test for SW2:
From SW2 to SW4:
SW2#ping 192.168.20.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.20.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
But can't Reach SW3 or SW1 in VRF cu-red:
SW2#ping 192.168.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds: - C. U.U
Success rate is 0 percent (0/5)
Both R1 & R2 has separate tables for VRFs cu-red and cu-green. - D. U.U
Success rate is 0 percent (0/5)
SW2#ping 192.168.2.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.2.1, timeout is 2 seconds: - E. See the solution below in Explanation.
Answer: E
Explanation:
Solution:
Use cu-red under interfaces facing SW1 & SW3:
On R1:
interface Ethernet0/0
ip vrf forwarding cu-red
ip address 192.168.1.254 255.255.255.0
Check reachability to SW1:
R1#ping vrf cu-red 192.168.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.2.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
On R2:
interface Ethernet0/0
ip vrf forwarding cu-red
ip address 192.168.2.254 255.255.255.0
Check reachability to SW3:
R2#ping vrf cu-red 192.168.2.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds:
!!!!!
Use vrf cu-green for SW2 & SW4:
On R1:
interface Ethernet0/1
ip vrf forwarding cu-green
ip address 192.168.20.254 255.255.255.0
Test reachability to SW2:
R1#ping vrf cu-green 192.168.20.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.22.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
On R2:
interface Ethernet0/1
ip vrf forwarding cu-green
ip address 192.168.22.254 255.255.255.0
Test reachability to SW4:
R2#ping vrf cu-green 192.168.22.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.20.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
On R1:
interface Ethernet0/2.100
mpls ip
!
interface Ethernet0/2.200
mpls ip
!
Configure BGP:
router bgp 65000
neighbor 10.10.10.2 remote-as 65000
neighbor 10.10.20.2 remote-as 65000
!
address-family vpnv4
neighbor 10.10.10.2 activate
neighbor 10.10.20.2 activate
exit-address-family
!
address-family ipv4 vrf cu-green
redistribute connected
exit-address-family
!
address-family ipv4 vrf cu-red
redistribute connected
exit-address-family
!
R1(config)#ip vrf cu-red
R1(config-vrf)#route-target both 65000:100
!
R1(config)#ip vrf cu-green
R1(config-vrf)#route-target both 65000:200
On R2:
interface Ethernet0/2.100
mpls ip
!
interface Ethernet0/2.200
mpls ip
!
router bgp 65000
neighbor 10.10.10.1 remote-as 65000
neighbor 10.10.20.1 remote-as 65000
!
address-family vpnv4
neighbor 10.10.10.1 activate
neighbor 10.10.20.1 activate
exit-address-family
!
address-family ipv4 vrf cu-green
redistribute connected
exit-address-family
!
address-family ipv4 vrf cu-red
redistribute connected
exit-address-family
R2(config)#ip vrf cu-red
R2(config-vrf)#route-target both 65000:100
!
R2(config)#ip vrf cu-green
R2(config-vrf)#route-target both 65000:200
Verification:
From SW1 to SW3:
SW1#ping 192.168.1.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
But can't Reach SW2 or SW4 in VRF cu-green:
SW1#ping 192.168.22.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.22.1, timeout is 2 seconds:
NEW QUESTION # 93
Which controller manages the orchestration plane of Cisco SD-WAN in a cloud deployment?
- A. Cisco DNA Center
- B. vSmart
- C. vBond
- D. vManage
Answer: C
NEW QUESTION # 94
A vEdge platform is sending VRRP advertisement messages every 10 seconds. Which value configures the router back to the default timer?
- A. 1 second
- B. 2 seconds
- C. 3 seconds
- D. 5 seconds
Answer: C
NEW QUESTION # 95
Drag and drop the vManage policy configuration procedures from the left onto the correct definitions on the right.
Answer:
Explanation:
NEW QUESTION # 96
Refer to the exhibit. Which configuration value is used to change the administrative distance of iBGP routes to 20?
- A. Configure Local Distance to 20
- B. Configure External routes distance 20
- C. Configure Propagate AS Path to off
- D. Configure internal Routes Distance to 20
Answer: A
NEW QUESTION # 97
Drag and drop the steps from the left into the order on the right to upload software on vManage repository that is accessible from maintenance > Software Repository.
Answer:
Explanation:
Explanation
https://sdwan-docs.cisco.com/Product_Documentation/vManage_Help/Release_18.2/Maintenance/Software_Rep
NEW QUESTION # 98
A company must avoid downtime at the remote sites and data plane to continue forwarding traffic between WAN Edge devices if the branch router loses connectivity to its OMP peers Which configuration meets the requirement?
- A.
- B.
- C.
- D.
Answer: D
NEW QUESTION # 99
What address do PIM routers listen to in order to automatically discover the best RP for each multicast group?
- A. 224.0.0.13
- B. 224.0.1.39
- C. 224.0.0.14
- D. 224.0.1 40
Answer: D
Explanation:
Explanation/Reference:
NEW QUESTION # 100
An engineer provisions a WAN Edge router. Which command should be used from the WAN Edge router to activate it with vManage?
- A. request vedge-cloud activate chassis-number serial
- B. request vedge-cloud activate chassis-number organization
- C. request vedge-cloud activate serial token
- D. request vedge-cloud activate chassis-number token
Answer: D
NEW QUESTION # 101
Drag and drop the attributes from the left that make each transport location unique onto the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 102
Drag and drop the devices from the left onto the correct functions on the right.
Answer:
Explanation:
Reference:
https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2019/pdf/LTRCRS-3550.pdf slide 8
NEW QUESTION # 103 
Refer to the exhibit The Cisco SD-WAN network is configured with a default full-mesh topology. Islamabad HQ and Islamabad WAN Edges must be used as the hub sites. Hub sites MPLS TLOC must be preferred when forwarding FTP traffic based on a configured SLA class list. Which policy configuration does the network engineer use to call the SLA class and set the preferred color to MPLS?
- A. Centralized Policy, Traffic Policy
- B. Localized Policy, Route Policy
- C. Centralized Policy Topology
- D. Localized Policy, Forwarding Class
Answer: A
NEW QUESTION # 104
Which port is used for vBond under controller certificates if no alternate port is configured?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
NEW QUESTION # 105
Refer to the exhibit.
A network administrator is configuring OMP in vManage to advertise all the paths for the same prefix from a site that has two WAN Edge devices Each WAN Edge device is connected to three ISPs and two private MPLS transports. What is the minimum value for 'Number of Paths advertised per Prefix" that should be configured?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 106
An engineer is adding a tenant with location ID 399533345 in vManage. What is the maximum number of alphanumeric characters that is accepted in the tenant name filed?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
NEW QUESTION # 107
Which configuration allows users to reach YouTube from a local Internet breakout?
A)
B)
C)
D)
- A. Option B
- B. Option C
- C. Option D
- D. Option A
Answer: A
Explanation:
https://www.cisco.com/c/dam/en/us/td/docs/solutions/CVD/SDWAN/sdwan-dia-deploy-2020aug.pdf
NEW QUESTION # 108
Which two mechanisms are used to guarantee the integrity of data packets in the Cisco SD-WAN architecture data plane? {Choose two)
- A. certificates
- B. TPM chip
- C. authentication headers
- D. encapsulation security payload
- E. transport locations
Answer: C,D
Explanation:
https://sdwan-docs.cisco.com/Product_Documentation/Software_Features/Release_18.4/Security
/01Security_Overview/Data_Plane_Security_Overview
NEW QUESTION # 109
The SD-WAN network is configured with a default full-mesh topology. The SD-WAN engineer wants the Barcelona WAN Edge to use the MPLS TLOC when forwarding Telnet traffic based on a configured SLA class list. Which configured must the engineer use to create a policy to call the SLA class and set the preferred color to MPLS?
- A.
- B.
- C.
- D.
Answer: D
NEW QUESTION # 110
A customer has 1 to 100 service VPNs and wants to restrict outbound updates for VPN1 Which control policy configuration restricts these updates?
- A.
- B.
- C.
- D.
Answer: B
NEW QUESTION # 111
......
Domain 5: Service Quality and Security
In the framework of this topic, the learners must show that they are conversant with customizing and assessing service insertion; explaining application-aware firewall; customizing and assessing QoS treatment on WAN edge routers (scheduling, queuing, shaping, policing).
Exam Materials for You to Prepare & Pass 300-415 Exam: https://www.topexamcollection.com/300-415-vce-collection.html
Pass Your 300-415 Exam at the First Try with 100% Real Exam: https://drive.google.com/open?id=1gSoQZvLmU_IuHrBuoR_Eo8h9Nxt528-E
